Changes in Level - Accessible Route Tool This handy tool was developed by Evan Terry Associates to assist its surveyors in measuring changes in level along an accessible...
Search Results "Door Surface"
-
Changes in Level - Accessible Route Tool
-
g-iii
Is there clear maneuvering floor space in front of each accessible door (see ADA Standards § Fig. 25) and, on the pull side, is there at least 18 inches clear floor space beyond the latch...
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
Besam SW200i Overhead Concealed Swing Door Operator for Dual Egress
-
NABCO GT1175-09L Single Slider RH - Full Open Surface Mounted
Requires the Premium User plan or above. (Login or upgrade your account!) -
NABCO GT1175-09L Single Slider LH - Full Open Surface Mounted
Requires the Premium User plan or above. (Login or upgrade your account!) -
5.1 Transfer Surface Height Recommendations
5.1 Transfer Surface Height Recommendations Description: The transfer height is set above the finished floor surface to permit transfers form mobility devices onto the transfer surface...
-
5.1.3 Transfer Surface Low Height
5.1.3 Transfer Surface Low Height. No agreement on final low height...
-
Corbin Russwin Inc. DC46900 Series Safeguard Door Closers
DC46920 Unit Pull side mounted unit for right hand and left hand single doors or pairs of doors. For doors flush with frame, or with 1/8" maximum reveal on pull side....
-
M302.2.1 Adjustability (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface height range for diagnostic equipment used by patients in a seated position of 17 inches minimum and 19 inches maximum....
-
DORMA BTS80 EMB Series Door Closer
, or tempered glass door applications....
-
B. Slopes
[ADA Stds. 4.8.4] Yes __ No __ N/A __ Comments: ___________________________________________ ...for corridors into which at least one door swings, is there at least 54" clear floor...
-
Hager Companies Oval Wrought Door Pull 9
Oval Wrought Door Pull Materials: - Brass, Bronze, Stainless Steel Options: - May be combined with a plate to make a pull plate Certification: - Meets ANSI A156.6 for J401 Pulls...
-
1013.3 Height
From the adjacent walking surfaces; 2. On stairs, from the line connecting the leading edges of the tread nosings; and 3. On ramps, from the ramp surface at the guard....
-
1015.3 Height
Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: From the adjacent walking surfaces....
-
T502.3.2 Thresholds
The stripe shall be 1 inch (25 mm) wide minimum and contrast with the rest of the walking surface either light-on-dark or dark-on-light....
-
Yale 51 Series Industrial Door Closer
They are ideal for use with aluminum store front doors and frames, yet they also complement wood or metal door installations....
-
11B-102 Dimensions for adults and children
this chapter includes technical requirements based on children's dimensions and anthropometries for drinking fountains, water closets, toilet compartments, lavatories and sinks, dining surfaces...
-
F102 Dimensions for Adults and Children
this document includes technical requirements based on children's dimensions and anthropometrics for drinking fountains, water closets, toilet compartments, lavatories and sinks, dining surfaces...
-
11B-102 Dimensions for adults and children.
this chapter includes technical requirements based on children’s dimensions and anthropometrics for drinking fountains, water closets, toilet compartments, lavatories and sinks, dining surfaces...
-
11B-102 Dimensions for adults and children
this chapter includes technical requirements based on children’s dimensions and anthropometrics for drinking fountains, water closets, toilet compartments, lavatories and sinks, dining surfaces...
-
Priority 1: Approach & Entrance
Word Fillable Form (1.5MB) Word Non-Fillable Form (1.3MB) PDF Non-Fillable Form (0.8MB)
