Floor designations complying with 703.2 and 703.4.1 shall be provided on both jambs of elevator hoistway entrances....
Search Results "Altered Elevator"
Filters
Commonly Searched Documents
-
407.2.3.1 Floor Designation
-
II. GENERAL NONDISCRIMINATION REQUIREMENTS
Failing or refusing to make alterations to QuikTrip Stores in full compliance with 42 U.S.C. § 12183(a)(2), 28 C.F.R. §§ 36.402 - 36.406, and the ADA Standards; d....
-
§ 35.150 Existing facilities
§ 35.150 Existing facilities. * * * * *
-
8. Amend § 35.150 as follows:
8. Amend § 35.150 as follows: a. Redesignate paragraph (b)(2) as paragraph (b)(3); b. Add the words "or acquisition" after the word "redesign" in the first sentence of...
-
§35.150 Existing facilities
§35.150 Existing facilities.
-
404.2.3 Clear Width
In alterations, a projection of 5/8 inch (16 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
404.2.3 Doorways - Clear Width
In alterations, a projection of 5/8 inch (16 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
11B-404.2.3 Clear width
In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
11B-404.2.3 Clear width
Exceptions: In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop....
-
Clear Floor or Ground Space
The clear floor space is permitted to overlap onto the landing area to provide access to this elevated window activity....
-
11B-407.2.3.1 Floor designation
Floor designations complying with Sections 11B-703.2 and 11B-703.4.1 shall be provided on both jambs of elevator hoistway entrances....
-
11B-407.2.3.1 Floor designation
Floor designations complying with Sections 11B-703.2 and 11B-703.4.1 shall be provided on both jambs of elevator hoistway entrances....
-
Scenario 8 – Accessibility
Ayana recently enrolled in a school that does not have an elevator. The school was built in the early 1960s and, due to limited resources, the district has never altered the building....
-
Accessible Path of Travel
When alterations are made to a primary function area, an accessible path of travel to the area must be provided....
-
404.2.3 Clear Width
In alterations, a projection of 5/8 inch (16 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
11B-404.2.3 Clear width
In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop. 2. ...
-
404.2.3 Clear Width
In alterations, a projection of 5/8 inch (16 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
1. My business does not need to be compliant because the building is old and therefore is grandfathered.
If your facility was built or had any alterations made to it since January 26, 1992 (under the ADA) or was built or had any alterations made to it since 1970 (under California law), there...
-
11.1 Q. Under the individual building test, how is the second step of the test performed, which involves measuring the slope of the finished grade between the entrance and applicable arrival points?
A. The slope is measured at ground level from the entrance to the top of the pavement of all vehicular and pedestrian arrival points within 50 feet of the planned entrance, or, if...
-
1(2)(a) Site impracticality due to terrain
(a) Site impracticality due to terrain. There are two alternative tests for determining site impracticality due to terrain: the individual building test provided in paragraph (i), or...
-
IV. Deeming 2010 Standards as an Alternative Accessibility Standard for Section 504 Compliance
For purposes of Section 504 compliance, this does not mean that existing buildings that are part of a project and which are not being altered must be brought up to the 2010 Standards....