required by the proposed standards, examination tables that can be adjusted to a sitting position and then reclined to a horizontal position may be easier for patients with disabilities to transfer...
Search Results "Transfer Wall"
Commonly Searched Documents
-
Head and Back Support (M301.3.3 and M302.3.3)
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
patient lift to fit underneath the equipment so that the patient could be raised out of their mobility device, moved over to the medical diagnostic equipment, and then be lowered onto the transfer...
-
7.3 Imaging System Accessibility Configuration Examples and Concerns
This would reduce the distance between the floor and the transfer surface....
-
11B-606.2 Clear floor space
the following conditions are met: (a) the cabinetry can be removed without removal or replacement of the fixture; (b) the finish floor extends under the cabinetry; and (c) the walls...
-
211 and 602 Drinking Fountains
The 1991 Standards require wall and post-mounted cantilevered drinking fountains mounted at a height for wheelchair users to provide clear floor space for a forward approach with knee and...
-
Alteration
restoration, resurfacing of circulation paths or vehicular ways, changes or rearrangement of the structural parts or elements, and changes or rearrangement in the plan configuration of walls...
-
604.7 Dispensers
If toilet paper dispensers are installed above the side wall grab bar, the outlet of the toilet paper dispenser must be 48 inches (1220 mm) maximum above the finish floor and the top of...
-
Typical Issues
The survey should also identify any protruding objects (wall mounted or overhead) along the circulation route to voter check-in and the voting area. Notes: 1....
-
4.4.1* GENERAL
Objects projecting from walls (for example, telephones) with their leading edges between 27 in and 80 in (685 mm and 2030 mm) above the finished floor shall protrude no more than 4 in (100...
-
Kitchen Cabinets
(above finished floor) wall-mounted cabinets and counters for tall people....
-
604.7 Dispensers
If toilet paper dispensers are installed above the side wall grab bar, the outlet of the toilet paper dispenser must be 48 inches (1220 mm) maximum above the finish floor and the top of...
-
Maintaining Concentration
space away from audible distractions Redesign employee’s office space to minimize audible distractions To reduce visual distractions: Install space enclosures (cubicle walls...
-
11B-809.9.2 Clear width
have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work surface, appliance or wall...
-
1133A.2.1 Clear width
measured between any cabinet, countertop or the face of any appliance (excluding handles and controls) that projects into the kitchen and the opposing cabinet, countertop, appliance or wall...
-
11B-216.13.3 Conditions of use
Floor or wall coverings, floor or wall covering adhesives, carpets, formaldehyde-emitting particleboard cabinetry, cupboards or doors have not been installed or replaced in the previous...
-
11B-805.7 Built-in cabinets and work surfaces
California, has issued Code Application Notice CAN 2-11B, dated 9/9/14, which includes the following interpretation of Section 11B-805.7: Built-in equipment consoles include recessed or wall...
-
11B-604.3.2 Overlap
Exception: In residential dwelling units, a lavatory complying with Section 11B-606 shall be permitted on the rear wall 18 inches (457 mm) minimum from the water closet centerline where...
-
11B-407.4.1 Car dimensions
DIMENSIONS MINIMUM DIMENSIONS Door Location Door clear width Inside car, side to side Inside car, back wall...
-
11B-604.3.2 Overlap
Exception: In residential dwelling units, a lavatory complying with Section 11B-606 shall be permitted on the rear wall 26 inches (660 mm) minimum from the water closet centerline to allow...
-
11B-407.4.1 Car dimensions
ELEVATOR CAR DIMENSIONS MINIMUM DIMENSIONS Door Location Door clear width Inside car, side to side Inside car, back wall...
- PEMKO 5 1/8" Thermal Barrier Threshold No. 252X3-FG
- Kompan, Inc. M590 - Mermaid's Fountain
- Pemko 252X2_FG Thermal Barrier Threshold
- PEMKO 6 1/8" Thermal Barrier Threshold No. 273X3-FG