The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 11B-703.3.1 _|Braille Dimensions|_....
Search Results "Clearance in Base"
-
11B-407.4.7.2 Keypads
-
11B-707.9.1.1 Tactilely discernible numerical keypad
A tactilely discernible numerical keypad similar to a telephone keypad containing a raised dot with a dot base diameter between 1.5 mm and 1.6 mm and a height between 0.6 mm and 0.9 mm on...
-
11B-1009.2 Pool lifts
Pool lift seats that consist of materials that resist corrosion and provide a firm base to transfer will be usable by a wider range of people with disabilities....
-
11B-403.5.3 Passing spaces
a space 60 inches (1524 mm) minimum by 60 inches (1524 mm) minimum; or, an intersection of two walking surfaces providing a T-shaped space complying with Section 11B-304.3.2 where the base...
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
Kompan, Inc. Flexus GXY919
Grab ahold of the curved bars and step onto the rubber-coated base platform for a wild ride on the Flexus!...
-
1. Background
In recent years, however, other text-based means of communication have emerged, including simple message service (SMS or text messages) and real-time text (RTT) technology....
-
Rockwood Manufacturing Company 702 Handrail Bracket
Base: 2-13/16" Projection (to Rail Centerline): 3-1/2" Weight: 1.5 lbs. Most of Rockwood's products are available in a wide variety of architectural finishes....
-
TelCom Cyberdata IP Phone Strobe for VoIP Phone Systems 011087 Visual Alerting Device
The IP Strobe is easy to set up and works with any IP based phone system or hosted solution. ...
-
American Safety Tread Co., Inc. Type T-24 Contrasting Stripe
/4" Thickness: 5/16" Anchor Options: Full length, integrally extruded 5/8” anchor Impact Resistant: These nosings are manufactured from an extruded aluminum base...
-
Emu STAR ADA #303 Table
Outdoor/Indoor Table E-coated powder coat finish ADA Compliant Top Thicknewss 1 3/8" Top: Solid Steel Base: Tubular Steel Legs Assembly required: Yes...
-
ROXIMITY's Model O iBeacon
The replaceable battery lasts 3 to 15 months based on your specific configuration. Low Cost - The Model O is the most affordable beacon on the market....
-
Soiltac Powder Topical
The Soiltac Powder Topical is applied to a base of 2 inches of native soil....
-
Klingstone 400
The Klingstone 400 is applied to materials on top of a base, which is composed of 4 inches of ¾ inch minus limestone and dust....
-
505.4 Height
Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment. Figure 505.4 Handrail Height...
-
604.8.1.2 Doors
Toilet compartment doors, including door hardware, shall comply with 404 except that if the approach is to the latch side of the compartment door, clearance between the door side of the...
-
Chapter 3: Building Blocks
These requirements address floor and ground surfaces (302), changes in level (303), wheelchair turning space (304), clear floor or ground space (305), knee and toe clearance (306), protruding...
-
505.4 Height
Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment....
-
604.8.1.2 Doors
Toilet compartment doors, including door hardware, shall comply with 404 except that if the approach is to the latch side of the compartment door, clearance between the door side of the...
-
11B-505.4 Height
Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment. FIGURE 11B-505.4 HANDRAIL HEIGHT...
-
A4.31.9 Text Telephones
text telephone which is not a single integrated text telephone pay phone unit will require a shelf large enough (10 in (255mm) wide by 10 in (255 mm) deep with a 6 in (150 mm) vertical clearance...
-
Clear Floor Space [4.35.2]
Benches can overlap turning space where clearance (9 inches minimum) is available for toes....
-
Additional Technical Criteria Considered for Handrails on Ramps
These technical criteria are available at http://www.access-board.gov/ada-aba/final.cfm#a505 and address continuity, height, clearance, gripping surface, cross section, surfaces, fittings...
