The control button for the emergency stop, alarm, door open, door close, and phone, shall be identified with raised symbols and Braille as shown in Table 11B-407.4.7.1.3....
Search Results "Clear Opening"
-
11B-411.4.7.3 Symbols
-
Horton Automatics Profiler® Smoke-Rated Telescoping ICU/CCU Sliding Door
With its telescoping function and full break-out capability, the door package can provide up to 80 inches of clear opening width in a full 12-foot system....
-
GUARD [DSA-AC, HCD 1, HCD 2 & HCD 1-AC] OR GUARDRAIL
A building component or a system of building components located at or near the open sides of elevated walking surfaces that minimizes the possibility of a fall from the walking surface to...
-
GUARD [DSA-AC] OR GUARDRAIL
A building component or a system of building components located at or near the open sides of elevated walking surfaces that minimizes the possibility of a fall from the walking surface to...
-
Transit Shelters (R308.2) (Section-by-Section Analysis)
A clear space (see R404) must be provided entirely within the transit shelter....
-
3. The Legislative History of the ADA
The legislative history of the ADA and the Department’s commentary in the preamble to the 1991 regulation make clear that although Congress was not requiring open captioning of movies in...
-
11B-404.2.8.2 Spring hinges
Door and gate spring hinges shall be adjusted so that from the open position of 70 degrees, the door or gate shall move to the closed position in 1.5 seconds minimum....
-
11B-407.3.3.1 Height
The device shall be activated by sensing an obstruction passing through the opening at 5 inches (127 mm) nominal and 29 inches (737 mm) nominal above the finish floor....
-
11B-407.3.3.1 Height
The device shall be activated by sensing an obstruction passing through the opening at 5 inches (127 mm) nominal and 29 inches (737 mm) nominal above the finish floor....
-
11B-404.2.8.2 Spring hinges
Door and gate spring hinges shall be adjusted so that from the open position of 70 degrees, the door or gate shall move to the closed position in 1.5 seconds minimum....
-
Spring Hinges: ADA Standard Section 404.2.8.2
Section 404.2.8.2 covers the current ADA Standards for door and gate spring hinges.
-
Height: ADA Standard Section 407.3.3.1
Section 407.3.3.1 covers the current ADA Standards for the height requirements of an elevators reopening device.
-
Common Problems with Toilet Rooms
some of the most common: Ø The door is too narrow, or there is not enough maneuvering space immediately inside or outside the toilet room door for a person using a wheelchair to open...
-
Texas Department of Licensing and Regulation (TDLR)
TDLR's Philosophy: To achieve smaller, smarter government, we: Honor the public by regulating in a fair, open, and consistent manner; Provide more opportunities and avenues...
-
Track Crossings: ADA Standard Section 810.10
EXCEPTION: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum....
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
The space beneath the lavatory shall be left clear and unobstructed; 4.2. ...
-
1133B.2.3.2
Slowly opening, low-powered, automatic doors shall comply with BHMA A156.19....
-
EXHIBIT F ADA Maintenance Checklist
Is the door easy to open? ___ Yes ___ No e. Does the door closer take at least 3 seconds to close the door? ___ Yes ___ No f....
-
Technical Requirements for Accessible Hiker/Pedestrian Trails
Section 7.4 of FSTAG explains the accessibility requirements for trails, including trail surfacing, clear tread width, grade and cross slope, resting intervals, passing spaces, tread obstacles...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
Door Closers and Gate Closers: ADA Standard Section 404.2.8.1
Section 404.2.8.1 covers the current ADA Standards for the closing speed of door closers and gate closers.
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-810.10 Track crossings
Exception: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum....
-
11B-810.10 Track crossings
Exception: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum....
