[ADA Standards § 4.31.5] Yes No...
Search Results "1991 Standards"
2010 ADA Definition
1991 Standards: From 2010 Title II Regulations section 35.104 & 2010 Title III Regulations section 36.104: Requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this part.
-
I2
-
Detectable warnings on curb ramps
(DOT ADA Standard 406.8.)...
-
f-i
[ADA Standards § 4.11.3] Yes No...
-
E202.1 General
ICT shall be exempt from compliance with the 508 Standards to the extent specified by E202....
-
Trail Class
The prescribed scale of development for a trail, representing its intended design and management standards....
-
M101.4 Dimensions
The standards are based on adult dimensions and anthropometrics. Dimensions that are not stated as "maximum" or "minimum" are absolute....
-
Is there a minimum number of risers a stairway must have for it to be covered?
No, the Standards apply to any stairs that are part of a means of egress regardless of the number of risers....
-
M101.4 Dimensions
The standards are based on adult dimensions and anthropometrics. Dimensions that are not stated as “maximum” or “minimum” are absolute....
-
B. Regulatory Flexibility Act
The Access Board’s guidelines for transportation vehicles were initially promulgated in 1991, and thereafter amended in 1998 to include accessibility requirements for OTRBs....
-
Attachment J
Standards §§ 4.1.2(5), 4.6.4, 4.30.7(1).Standards §§ 4.1.2(5), 4.6, 4.30.7(1)....
-
ADA Requirements - Effective Communication
These requirements, or rules, clarify and refine issues that have arisen over the past 20 years and contain new, and updated, requirements, including the 2010 Standards for Accessible Design...
-
4. Overview of Equipment Types
Section 5 presents the detailed recommendations of the MDE Advisory Committee for MDE accessibility standards....
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
Inclined Wheelchair Lifts
The ASME standard allows inclined lifts with enclosures and those without....
-
Questionnaire
The first question, shown in Figure 4, was based on ASTM 1927-28: Standard Guide for Conducting Subjective Pavement Ride Quality Ratings....
-
ADA Requirements - Service Animals
These requirements, or rules, clarify and refine issues that have arisen over the past 20 years and contain new, and updated, requirements, including the 2010 Standards for Accessible Design...
-
F. Assisted Listening Devices:
See the 2010 Standards §219.3. PSE shall ensure that the Assisted Listening Devices remain in good working order and any defects or issues are resolved expeditiously....
-
11B-219.2 Required systems
[2010 ADA Standards] 219.2 Required Systems....
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
11B-404.2.4 Maneuvering clearances
[2010 ADA Standards] EXCEPTION: Entry doors to hospital patient rooms shall not be required to provide the clearance beyond the latch side of the door....
-
11B-407.2.1.2 Size and shape
[2010 ADA Standards] 407.2.1.2 Size. Call buttons shall be ¾ inch (19 mm) minimum in the smallest dimension. Exception: Reserved....
-
11B-407.2.1.5 Signals
[2010 ADA Standards] 407.2.1.5 Signals. Call buttons shall have visible signals to indicate when each call is registered and when each call is answered....
-
Running Slope of Ramps Deployed to Roadways or Curb-Height Bus Stops
1:6 more than 6 inches and equal to or less than 9 inches 1:8 more than 9 inches 1:12 In 1991...
-
M101.5 Dimensions
The MDE Standards are based on adult dimensions and anthropometrics. Dimensions that are not stated as “maximum” or “minimum” are absolute....