Where play tables are provided, knee clearance 24 inches (610 mm) high minimum, 17 inches deep (432 mm) minimum, and 30 inches (762 mm) wide minimum shall be provided....
Search Results "Kitchen Clearance"
Filters
Commonly Searched Documents
-
11B-1008.4.3 Play tables
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...
-
11B-212 KITCHENS, KITCHENETTES, WET BARS AND SINKS
[See subsections ...]
-
Knee and Toe Clearance
Accessible lavatories and sinks must provide knee and toe clearance for a forward approach (606.2)....
-
R405 Knee and Toe Clearance (Section-by-Section Analysis)
R405 Knee and Toe Clearance (Section-by-Section Analysis) The technical requirements for knee and toe clearance apply where space beneath an element is included as part of the clear space...
-
404.2.4 Maneuvering Clearances
404.2.4 Maneuvering Clearances. Minimum maneuvering clearances at doors and gates shall comply with 404.2.4....
-
Grohe Essence Kitchen Pull-out Faucet
Pure clear lines characterize our Essence kitchen pull-out faucet -- the progressive design embodies minimalist beauty in its purist form. ...
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
Circular Space: ADA Standard Section 304.3.1
Section 304.3.1 covers the current ADA Standards for circular turning space.
-
American Standard Arch Single Handle Pull-Out Kitchen Faucet with Soap Dispenser 4101.101
This high-arching monoblock faucet from our Arch™ Faucet Collection complements kitchens with modern décor....
-
404.2.4 Maneuvering Clearances
Minimum maneuvering clearances at doors and gates shall comply with 404.2.4....
-
4.19.2 HEIGHT AND CLEARANCES
Provide a clearance of at least 29 in (735 mm) from the floor to the bottom of the apron. Knee and toe clearance shall comply with Fig. 31....
-
4.19.2 Height and Clearances
Provide a clearance of at least 29 in (735 mm) above the finish floor to the bottom of the apron. Knee and toe clearance shall comply with Fig. 31....
-
11B-304.3.1 Circular space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306....
-
American Standard Colony PRO Two-Handle Kitchen Faucet with Low-Arc Swivel Spout 7074.500
The Colony PRO two-handle kitchen faucet showcases fresh, transitional style with a reliable construction from a brand you can depend on....
-
404.2.4 Maneuvering Clearances
Minimum maneuvering clearances at doors and gates shall comply with 404.2.4....
-
11B-306.2.2 Maximum depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
TM 2013-22 Storage (Kitchens and Kitchenettes) Effective Date: October 3, 2013 2012 TAS Reference: 804.5 TAS 804.5 requires at least 50% of the shelf space in storage facilities...
-
Clearances: ADA Standard Section 1003.3
Clearances at boat slips and on boarding piers at boat launch ramps shall comply with 1003.3. Advisory 1003.3 Clearances....
-
Maneuvering Space, Adjustable Cabinetry, Fixtures and Plumbing
A number of commenters from the disability community stated that it was important that the Guidelines for both kitchens and bathrooms specify a five-foot turning radius; adjustable cabinetry...
-
American Standard Monterrey Bottom-Mount Kitchen Faucet with Tubular Swivel Spout
Monterrey Bottom-Mount Kitchen Faucet with Tubular Swivel Spout features durability and dependability to help save water and lessen the cost of maintenance from year to year....
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1 1/2 inches (38 mm) minimum....
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1 1/2 inches (38 mm) minimum....
