Landings shall be provided at the tops of curb ramps. The landing clear length shall be 36 inches (915 mm) minimum....
Search Results "Curb Cut"
Filters
Commonly Searched Documents
-
406.4 Landings
-
Detectable warnings on curb ramps
Curb ramps must have detectable warnings. (DOT ADA Standard 406.8.)...
-
4. Example: Installing Curb Ramps for Program Accessibility
Some intersections have curb ramps; most do not. The town is trying to figure out where to install curb ramps to provide access to the town hall....
-
406.4 Landings
Landings shall be provided at the tops of curb ramps. The landing clear length shall be 36 inches (915 mm) minimum....
-
Built-Up Curb Ramps
Built-up curb ramps are permitted, but they cannot project in parking spaces, access aisles, or vehicle traffic lanes....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
Obstructions [4.7.8]
At curb ramps, a landing provides the necessary connection to an accessible route. A landing with a minimum length of 48 inches will provide sufficient turning space....
-
DSA Drawing 11B-406-5 Perpendicular Curb Ramp next to a Curb and Gutter (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12.
-
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12.
-
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12.
-
Width [4.7.3] and Surface [4.7.4]
The minimum clear width of a curb ramp is 36 inches, exclusive of flared sides....
-
Why is a top landing required at curb ramps if side flares are provided?
A landing at least 36” long at the top of curb ramps provides room to approach or exit ramps and turn without encountering compound slopes of flared sides....
-
Parking Lots
Ensure that curb cuts for ramps are located appropriately—beside, not IN the parking space....
-
7 [§ 4.7.8]
7 [§ 4.7.8] Curb ramps must be located where they will not be obstructed by parked vehicles....
-
DSA Drawing 11B-406.6-2 Raised Island with No Gutters (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
Q3: Roadway Resurfacing Alteration Project and Curb Ramp Improvements
Q3: If a roadway resurfacing alteration project does not span the full width of the road, do I have to put in curb ramps?...
-
Top Landings
Commenters advised that landings should be specified at the top of curb ramps. Response....
-
DSA Drawing 11B-406-3 Perpendicular Curb Ramp next to a Curb and Gutter (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
Figure 405.9.2 Curb or Barrier Edge Protection – Drawing from the U.S. Access Board
-
406.8--Modification to 406 of Appendix D to 36 CFR Part 1191
406.8--Modification to 406 of Appendix D to 36 CFR Part 1191 A curb ramp shall have a detectable warning complying with 705....
-
Location at Marked Crossings [4.7.9]
The foot of a curb ramp must be contained within the crosswalk, where one is marked....
-
Roadway resurfacing, curb ramps at crosswalks
If roadways are being resurfaced or otherwise altered as part of a BRT project, curb ramps must be installed at crosswalks that have been affected. (DOT ADA Standard 106.5.)...
