Platforms and platform software shall conform to the requirements in ANSI/HFES 200.2, Human Factors Engineering of Software User Interfaces — Part 2: Accessibility (incorporated by reference...
Search Results "Limited Access Space"
-
502.4 Platform Accessibility Features
-
F247.3.2 Outdoor Recreation Access Routes
At least one outdoor recreation access route complying with 1016 shall connect the following: 1. Accessible parking spaces or other arrival points serving the trailhead; 2....
-
Are You Protected by The ADA?
Under the ADA, you have a disability if you have a physical or mental impairment that substantially limits a major life activity....
-
Pedestrian Access Route
Pedestrian Access Route. A continuous and unobstructed path of travel provided for pedestrians with disabilities within or coinciding with a pedestrian circulation path....
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
Each accessible route provided shall comply with the ADA Standards, including but not limited to the following requirements: (1) Width....
-
R303 Alternate Pedestrian Access Routes
R303 Alternate Pedestrian Access Routes (See R205)...
-
On existing locations when we add an EV station as van accessible how do we address taking two spaces from the facility (losing a space) and then not having the mandatory spaces remaining for the facility?
RESPONSE: All work is required to comply with the applicable codes, standards and ordinances. Parking ordinances are typically adopted within each city and county in California....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
1133A.2 Clear floor space
Clear floor space at kitchens shall comply with the following:...
- Access Board: Accessible Parking Signage
-
Valet Parking and Mechanical Access Parking Garages
Valet Parking and Mechanical Access Parking Garages....
-
Section 35.138 Ticketing (Section-by-Section Analysis)
operators, ticket sellers, and distributors were violating title II's nondiscrimination mandate by not providing individuals with disabilities the same opportunities to purchase tickets for accessible...
- Figure 604.2 Water Closet Location – Drawing from the U.S. Access Board
- Inclusion Solutions Accessible Route Sign
-
502.3.3 Marking
Access aisles shall be marked so as to discourage parking in them. The access aisle must be striped diagonally to designate it as a no-parking zone. Advisory 502.3.3 Marking....
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
11B-813.2.9 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
Approach and Maneuvering Clearance [§305.6 and §305.7]
Approach and Maneuvering Clearance [§305.6 and §305.7] Where the space is obstructed on both sides for more than half the depth, additional clearance is required for maneuvering....
-
Wheelchair Passage Width [4.2.1] and Passing Space [4.2.2]
A minimum width of 30 inches is generally sufficient for stationary space. Additional clearance is needed for maneuvering and sway....
-
603.2 Information on Accessibility and Compatibility Features
ICT support services shall include information on the accessibility and compatibility features required by 602.2....
-
A. Accessible Voting Program
The County shall maintain in operable working condition on Election Day those features of facilities and equipment (including, but not limited to, both permanent equipment such as lifts...
-
11B-503.5 Vertical clearance
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide...
-
Turning Space: ADA Standard Section 1010.1
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....