or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches by 26 inches, with a safety factor of at least 3 based...
Search Results "Clearance Around Base"
Commonly Searched Documents
-
§ 38.95(c)(1) Design load
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
2.4.2 Considerations of Manufacturers in Accessible MDE Design
To mitigate tipping risks, the size of table and chair bases can be increased....
- Hager Companies Door Pull 974B
-
Upper extremity cardio machine
I'm short, around 4'8", and with many UE cycles it seems like my nose and face are right up against the unit in order to be able to reach without causing shoulder or neck issues, which is...
-
Stabilizer
The Stabilizer is applied to a base of 3 inches of compacted native soils. Stabilizer arrives pre-mixed with ¼ inch minus aggregate and is applied at a 3-inch depth on top of the base....
- International Society of Wheelchair Professionals (ISWP)
-
704.3 Volume Control Telephones
Amplifiers on pay phones are located in the base or the handset or are built into the telephone. Most are operated by pressing a button or key....
-
17. May an employer apply a "no-fault" leave policy, under which employees are automatically terminated after they have been on leave for a certain period of time, to an employee with a disability who needs leave beyond the set period?
While undue hardship cannot be based solely on the existence of a no-fault leave policy, the employer may be able to show undue hardship based on an individualized assessment showing the...
-
704.3 Volume Control Telephones
Amplifiers on pay phones are located in the base or the handset or are built into the telephone. Most are operated by pressing a button or key....
-
501.1 Scope
Firmware is read-only memory (ROM) based software that is sometimes distinguished from software and hardware....
-
Managed Use
A mode of travel that is actively managed and appropriate on a trail, based on its design and management. 1....
-
Category 1 Eligibility
One implication of this language is that an individual does not lose paratransit eligibility based on “inability to navigate the system” because the individual chooses to travel with a friend...
- Just Manufacturing Classroom Concealed Ledgemount Teardrop Handle Faucet
- Just Manufacturing Concealed Classroom Faucet with Triple Radius Spout
-
1009.5.2 Transfer Space
A transfer space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
-
Are charging parties protected from retaliation?
Even if an individual has already filed a charge of discrimination, s/he can file a new charge based on retaliation....
-
219 Assistive Listening Systems
Section 219.3 specifies the minimum number of receivers according to a sliding scale based on the seating capacity of the assembly area....
-
§ 36.208(b)
(b) In determining whether an individual poses a direct threat to the health or safety of others, a public accommodation must make an individualized assessment, based on reasonable judgment...
-
§ 36.303(d)(1)
real-time communication with individuals using auxiliary aids and services, including text telephones (TTYs) and all forms of FCC-approved telecommunications relay systems, including Internet-based...
-
Exits
Exits Scoping for entrances is based in part on the number of exits required by the applicable building or life safety code....
-
§100.500 Discriminatory effect prohibited.
[78 FR 11482, Feb. 15, 2013] Liability may be established under the Fair Housing Act based on a practice's discriminatory effect, as defined in paragraph (a) of this section, even if...
-
4. Changes Made to the Proposed Rule
The proposed rule was based on the report of a regulatory negotiation committee. We released a draft of the final rule in 2009....