A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
Search Results "Standing Surface"
Filters
Commonly Searched Documents
-
Parallel Approach: ADA Standard Section 904.4.1
-
Accessible Routes to Press Boxes
Press boxes in assembly facilities are required to be on an accessible route except for certain bleacher-mounted and free-standing types....
-
M101.2 Application
• A weight scale can be used by patients seated in a wheelchair, or seated on a built-in folding seat, or standing and holding onto supports....
-
Registration Table
Place handouts at the front edge of the table to make them easier to reach for participants both seated and standing....
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
Story
That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
11B-406.5.6 Grade breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
11B-303.5 Warning curbs
Abrupt changes in level exceeding 4 inches (102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning...
-
Mammography Chair [M302]
Mammography Chair [M302] Recommendation: The mammography chair is an essential piece of equipment allowing persons who are unable to stand or balance to sit for the diagnostic procedure...
-
Exercise Machine
A great machine that offers plenty of flexibility for different types of exercises that can be done from a seated or standing position....
-
AJW Architectural Products U705 Series 16"W x 30"H Angle Frame Mirror w/ Mounted Shelf - Plate Glass Surface
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Mitered corners are ground and polished smooth Multiple reflective surfaces available Unit is equipped...
-
AJW Architectural Products U716 Series 16"W x 20"H Channel Frame Mirror w/ Mounted Shelf - Plate Glass Surface
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Frame miters are not ground smooth and polished Multiple reflective surfaces available Unit is equipped...
-
3. Testimony of Class Members
Kirola argues that she may satisfy her burden of demonstrating standing based on the experiences of persons other than herself; to wit, class members. Dkt. 672, 13:22-14:3....
-
4.35.5 Mirror
full-length mirror, measuring at least 18 in wide by 54 in high (460 mm by 1370 mm), shall be mounted in a position affording a view to a person on the bench as well as to a person in a standing...
-
7.2 SERVICE COUNTERS
Where service counters exceeding 36 in (915 mm) in height are provided for standing sales or distribution of goods to the public, an auxiliary counter or a portion of the main counter shall...
-
ACTIONS TO BE TAKEN BY THE STATE DEPARTMENT OF AGING
As of 2014, SDA is a stand-alone agency, and has begun to develop its own policies and procedures....
-
STORY
[DSA-AC] That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
11B-705.2 Detectable directional texture
transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars raised 0.2 inch (5.1 mm) from the surface...
-
Polling place violations that can be remediated with temporary measures
Henderson Elementary School, 1800 Dismuke Street, Houston, TX Parking: The surface slope in the designated accessible parking space is not level in all directions and exceeds the...
-
Counter: ADA Standard Section 904.3.2
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
11B-904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
Mammography Equipment
Mammography Equipment A mammography exam typically requires the patient to stand up. Individuals who use wheelchairs will need to have an exam while staying in their wheelchair....
-
211 Drinking Fountains
In addressing drinking fountains, the guidelines cover access for people who use wheelchairs and access for standing persons who may have difficulty bending or stooping....
-
Concessions
Concessions • All concessions, including food service areas, restaurants, and souvenir stands, must be accessible....
