Curb ramps, blended transitions and islands on accessible routes shall comply with Section 11B-406....
Search Results "Exterior Route"
Commonly Searched Documents
-
11B-406.1 General
-
11B-404.2.4.3 Recessed doors and gates
clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the latch side of an exterior...
-
Building
The commenter stated that, in the building industry, "building" is defined by exterior walls and fire walls, and that an apartment structure of four units could be subdivided into two separate...
-
Purpose of the project
For instance, when this project began, tolerances for the measurement of the slope, flatness, and smoothness of exterior walking and rolling surfaces in concrete, asphalt, unit masonry,...
-
Models with audio
The models are smooth metal but a sample piece of the exterior “skin” of each airplane is adjacent to the models....
-
Construction Sites: ADA Standard Section 203.2
Section 203.2 covers scoping requirements of general exceptions for construction sites in the most current ADA Standards.
-
Taking Photographs
It is a good idea to take several photos of the exterior and interior of the polling place. We recommend taking photographs of measurements and noncompliant elements such as steps....
-
4(6)
(6) At the primary entry door to dwelling units with direct exterior access, outside landing surfaces constructed of impervious materials such as concrete, brick or flagstone, are no more...
-
Inventory Control Devices
This clearance is often useful at exterior doors without latches in countering the force of closers and wind resistance. When doors are automated, maneuvering space is not required....
-
1.1.4
1.1.4 A maximum overall design running slope for exterior accessible ramps of 7.5% (1:13.3 or 1:13) is recommended....
-
Attachment J
On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space designated as reserved for people with disabilities. ...
- NavCog Navigation iPhone App
-
Play Areas
Word Fillable Form (0.4MB) Word Non-Fillable Form (0.3MB) PDF Non-Fillable Form (0.3MB)
-
New Construction and Additions [4.1.2 and 4.1.3]
Sections 4.1.2 and 4.1.3 indicate which areas or elements of exterior sites and buildings are required to meet ADAAG's technical criteria in new construction....
-
Exits
Sometimes a required exit is designed to be used only as an exit and not as an entrance; in such instances there is no operating hardware on the exterior....
-
2.3.2
For exterior surfaces, a surveyor's transit or digital inclinometer may provide acceptable measurement for the same task....
-
§ 37.165(g)
If the entity chooses not to allow such individuals to use such a lift, it shall clearly notify consumers of this fact by signage on the exterior of the vehicle (adjacent to and of equivalent...
-
Typical Day One - Basic Facilities Requirements
Design Standards (ADAAG) (2 - 3 hours) This graphic and photographic tour of the ADAAG includes, if requested, its relationship to ANSI A117.1 and UFAS, scoping issues, the “accessible” route...
-
Accessible Boating Facilities
Other provisions contained in ADAAG address elements commonly found at a boating facility, such as accessible vehicle parking spaces, exterior accessible routes, and toilet and bathing facilities...
-
TABLE OF CONTENTS
ACCESSIBLE ELEMENTS AND SPACES: SCOPE AND TECHNICAL REQUIREMENTS 4.1 Minimum Requirements 4.1.1* Application 4.1.2 Accessible Sites and Exterior Facilities: New Construction...
- Sargent 7 Line Lever Lock
-
RESEARCH OBJECTIVES
Propose preliminary recommendations for accessibility guidelines for the firmness and stability of exterior surfaces....
-
1132A.5.2 Strike edge maneuvering space at doors
The width of the level area at the exterior side of the primary entry door and any required exit doors shall comply with Section 1126A....