It is thus edX’s commitment to ensure that our website, mobile applications, and platform are accessible to individuals with disabilities and that they permit content providers to develop...
Search Results "Platform Height"
Filters
Commonly Searched Documents
-
EXHIBIT A: EDX WEBSITE ACCESSIBILITY POLICY
-
Section 35.151(g)(2)
In the NPRM, the Department proposed Sec. 35.151(g)(2) which prohibits wheelchair spaces and companion seating locations from being “located on, (or obstructed by) temporary platforms or...
-
M305.3.1.2 Diagnostic Equipment Containing a Wheelchair Space
with one entry that also serves as the exit, the length of the gripping surface of horizontal standing supports shall be equal to or greater than 80 percent of the overall length of the platform...
-
Section 37.13 Effective Date for Certain Vehicle Lift Specifications
This section contains an explicit statement of the effective date for vehicle lift platform specifications....
-
4.30.2* Character Proportion
Letters and numbers on signs shall have a width-to-height ratio between 3:5 and 1:1 and a stroke-width to- height ratio between 1:5 and 1:10....
-
4.30.2* CHARACTER PROPORTION
Letters and numbers on signs shall have a width-to-height ratio between 3:5 and 1:1 and a stroke width-to-height ratio between 1:5 and 1:10....
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not displaying...
-
Elevated Play Component
Play components that are attached to a composite play structure and that can be approached from a platform or deck area are considered elevated play components. ...
-
§ 38.23(b)(2)(i) Requirements
lift and lowering the roll-off barrier shall be of a momentary contact type requiring continuous manual pressure by the operator and shall not allow improper lift sequencing when the lift platform...
-
§ 38.159(b)(2)(i) Requirements
lift and lowering the roll-off barrier shall be of a momentary contact type requiring continuous manual pressure by the operator and shall not allow improper lift sequencing when the lift platform...
-
B4. Vertical Clearance
Is the vertical height for the vehicle route to the loading zone, the drop off area, and the exit at least 114 inches (9 feet 6 inches) in height?...
-
TTYs
Commenters urged that a higher surface height for TTY keypads be specified....
-
6.1 Deliberative Process
6.1 Deliberative Process Box 6.1 shows the transfer surface height recommendation in the February 2012 Notice of Proposed Rulemaking on MDE accessibility standards (Section 1.3)....
-
Notes
Notes Z Seated height became the de facto height measurement method because this height is most relevant to clinicians as they conduct physical examinations of patients. ...
-
BACKGROUND
EdX owns and operates www.edx.org, mobile applications, and a Platform, which are available through the Internet to personal computers, laptops, mobile devices, tablets, and other similar...
-
COST OF EQUIPMENT
Range Average Price Price Increase Configuration #1: Accessible equipment as currently available on the market, standard chair arms and stirrups 19 inch max. height...
-
502.2 Documented Accessibility Features
Platforms and applications shall conform to 502.2....
-
Verify Electrical
Heights of all 30 amp or less outlet boxes. Measure to top or bottom of boxes 11B-308.1.1 Heights of all electrical switch boxes....
-
Verify Electrical
Heights of all 30 amp or less outlet boxes. Measure to top or bottom of boxes 11B-308.1.1 Heights of all electrical switch boxes....
-
Section 37.59 Differences in Accessibility Completion Date Requirements
., there is no need to install an elevator, and platform accessibility can be achieved by use of a relatively inexpensive mini-high platform)....
-
11B-605.4 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except that the flush control shall be mounted at a maximum height of 44 inches (1118 mm) above the finish floor....
-
11B-809.10.6.4 Reinforcement for grab bars
The grab bar reinforcement shall be 8 inches (203 mm) minimum in height....
-
Zero Project
It provides a platform where the most innovative and effective solutions to problems that persons with disabilities face, are shared....
-
8.4 Card Catalogs and Magazine Displays
Maximum reach height shall comply with 4.2, with a height of 48 in (1220 mm) preferred irrespective of approach allowed....
