The surface of the transfer system shall not be sharp and shall have rounded edges....
Search Results "Kitchen Work Surface"
Commonly Searched Documents
-
1009.5.5 Surface
-
1. WORKING WITH VOLUNTEERS
Be familiar with the type of volunteers you’re working with as well as common requirements needed for different types of operations....
- A Wheelchair Rider's Guide to the California Coast
-
Return to Work and Reasonable Accommodation (Including Reassignment)
Return to Work and Reasonable Accommodation (Including Reassignment) Employees on leave for a disability may request reasonable accommodation in order to return to work....
-
5.4.3 Transfer Support Height for M301 and M302
5.4.3 Transfer Support Height for M301 and M302 Description: Transfer support height applies to the vertical distance that the gripping area of the support is above the transfer surface...
-
Handrails [§504.6, §505]
Handrails [§504.6, §505] Handrails are required on both sides of stairs and must be continuous within the full length of each stair flight. Inside handrails on switchback or...
- Designing Sidewalks and Trails for Access, Part II of II: Best Practices Design Guide
-
Issues Related to the Interactive Process and Return to Work
The employee's doctor releases her to return to work, but imposes a medical restriction requiring her to take a 15-minute break every 90 minutes....
-
Q6: Curb Ramp Installation Work on Separate Contract
Q6: Is the curb ramp installation work required to be a part of the Plans, Specifications and Estimate package for an alteration project or can the curb ramp work be accomplished under a...
-
Section A: Parking
(§502.5) A4 Are designated accessible parking spaces and the access aisles serving them on a level surface, with slopes not exceeding 1:48 in all...
-
Conclusion
During this second phase of the independent wheelchair transfer study, platform transfers with and without grab-bars and a backrest and two-step transfers were evaluated. The study...
-
5.4.3 Transfer Support Height for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
Transfer supports should be positioned 6 inches minimum and 19 inches maximum above the transfer surface....
-
The following words describe construction and maintenance work
The following words describe construction and maintenance work:...
-
Q11: Utility Trench Work and Curb Ramp Compliance
Q11: When will utility trench work require compliance with ADA curb ramp requirements?...
-
Priority 1: Approach & Entrance
Word Fillable Form (1.5MB) Word Non-Fillable Form (1.3MB) PDF Non-Fillable Form (0.8MB)
-
Communication During Leave and Prior to Return to Work
Communication During Leave and Prior to Return to Work The interactive process may continue even after an initial request for leave has been granted, particularly if the employee's request...
-
809.2.2 Turning Space
For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space complying with 306 to be centered beneath....
-
809.2.2 Turning Space
For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space complying with 306 to be centered beneath....
-
809.2.2 Turning Space
For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space complying with 306 to be centered beneath....
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
Summary of Costs and Benefits
We compared the final rule to guidelines and standards used by the federal agencies for the design of outdoor developed areas without regard to accessibility to determine whether the...