Telecommunications equipment manufacturers shall evaluate the accessibility, usability, and interoperability of ICT during its product design, development, and fabrication....
Search Results "ISA: International Symbol of Accessibility"
Commonly Searched Documents
-
C201.5 Design, Development, and Fabrication
-
11B-216.8.1 Geometric symbols
Geometric symbols complying with Section 11B-703.7.2.6 shall be provided at entrances to toilet and bathing rooms....
-
4. Pressure Gauge
In general, if the operation of a door, a faucet, or other device requires more than 5 pounds of force, it is not accessible to many people with disabilities....
-
4.3.4 Passing Space
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
4.3.4 PASSING SPACE
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
2. IMPROVING PHYSICAL ACCESS
Access issues that should be considered include:...
- Access Board: Circular Space
- Access Board: Shower Seats
-
PHYSICAL CHANGES TO FACILITIES
. § 35.163(b), after having surveyed all facilities that are the subject of this Agreement for the purpose of identifying those that have multiple entrances not all of which are accessible...
-
233.3.3 Additions
Residential dwelling units required to comply with 233.3.1.1 shall be on an accessible route as required by 206....
-
K. Ambulatory Stall
If there are more than 5 stalls in any restroom, is there one stall in addition to the large accessible stall, that is 36" wide, has 2 parallel grab bars at 33"-36" off the floor and has...
-
DSA Drawing 11B-406-3C Curb Ramp Adjoining a Parking Access Aisle next to a Curb and Gutter (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!)
- Seating Solutions ADA Platforms, Ramps & Stairs
- Inclusion Solutions Blue Parking Stop
-
11B-411.2.1.5 Button requirements
Keypad buttons, the accessibility function button, and additional hall call console buttons shall comply with Section 11B-411.2.1.5....
-
11B-216.8.1 Geometric symbols
Geometric symbols complying with Section 11B-703.7.2.6 shall be provided at entrances to toilet and bathing rooms. Exceptions: 1. ...
-
233.3.3 Additions
Residential dwelling units required to comply with 233.3.1.1 shall be on an accessible route as required by 206....
-
11B-810.2.3 Connection
Bus stop boarding and alighting areas shall be connected to streets, sidewalks, or pedestrian paths by an accessible route complying with Section 11B-402....
-
Section 36.403 Alterations: Path of Travel (Section-By-Section Analysis and Response to Comments)
This concept of an accessible path of travel is analogous to the concepts of "accessible route'' and "circulation path'' contained in section 3.5 of the current UFAS....
-
Lines of Sight and Dispersion: ADA Standard Section 221.2.3
Section 221.2.3 covers scoping requirements in the current ADA Standards for lines of sight and dispersion of wheelchair spaces in assembly areas.
-
3 [§ 4.3.7]
The cross slope of a curb ramp, or any accessible route, may not exceed 2 percent....
-
§ 35.151(h) Medical care facilities.
In addition, medical care facilities that do not specialize in the treatment of conditions that affect mobility shall disperse the accessible patient bedrooms required by section 223.2.1...
-
Gates, Bars, and Berms
Forest Service-constructed barriers on pedestrian travel routes must have a 32-inch minimum width gap or include a route beside them that will permit passage of a wheelchair....
-
Error/Omission: Adequate maneuvering clearance is not provided at doors, including doors to accessible toilet stalls.
Error/Omission: Adequate maneuvering clearance is not provided at doors, including doors to accessible toilet stalls....