Different styles of design provide users varying levels of privacy and convenience....
Search Results "Design Guideline"
-
11B-222.1 General
-
American Specialties Folding Shower Seat 8205-L
FOLDING SHOWER SEAT 8205-L (Left Hand) Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly....
-
Sloan Royal® Urinal and Flushometer
Dual Bypass ADA compliant metal oscillating Non-Hold-Open Handle with Triple Seal Handle Packing Wall hung vitreous china with Integral flushing rim Meets the American Disabilities Guidelines...
-
Minimum Number: ADA Standard Section 234.4.2
Section 234.4.2 covers the most current ADA scoping requirements for the minimum number of wheelchairs spaces, transfer seats or devices at existing amusement rides.
-
11B-407.4.6.2 Buttons
Car control buttons with floor designations shall comply with Section 11B-407.4.6.2. Exception: Reserved....
-
11B-407.4.6.2 Buttons
Car control buttons with floor designations shall comply with Section 11B-407.4.6.2. Exception: Reserved....
-
11B-1005.3 Edge protection
Extending the deck of the fishing pier or platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-1005.3 Edge protection
Extending the deck of the fishing pier or platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs...
-
Readily achievable (Advisory Guidance)
Depending on the design, technology, or several other factors, it may be determined that providing accessibility to all products in a product line is not readily achievable....
-
B. Technical standards for criterion-related validity studies
length of time on the job where time on the job is likely to affect performance, and other relevant factors likely to affect validity differences; or that these factors are included in the design...
-
References
References "Guidelines for Reporting and Writing About People with Disabilities," produced by the Research and Training Center on Independent Living, University of Kansas....
-
R406 Reach Ranges (Section-by-Section Analysis)
The requirements for reach ranges differ from the 2004 ADA and ABA Accessibility Guidelines in that forward reach over an obstruction is not permitted, and side reach over an obstruction...
-
407.3.3 Numeric Keys (Section-by-Section Analysis)
The requirement for a tactilely discernible “5” key derives from existing 508 Standards § 1194.23(k)(1), but would be a new requirement for the 508 Standards and 255 Guidelines....
-
A4.26.1 General
The grab bar clearance of 1‒1/2 in (38 mm) required in this guideline is a safety clearance to prevent injuries resulting from arms slipping through the openings....
-
Protruding Object
Accessibility guidelines for protruding objects do not apply to naturally occurring objects, such as tree branches, or rock ledges....
-
Dwelling Unit
For purposes of these guidelines, use of the term “Dwelling Unit” does not imply the unit is used as a residence....
-
4.1.6(1)(d)
If stair modifications to correct unsafe conditions are required by other codes, the modifications shall be done in compliance with these guidelines unless technically infeasible....
-
Protruding Object
Accessibility guidelines for protruding objects do not apply to natural elements such as tree branches and rock formations. ...
-
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
[ADA Title III §36.104] 1991 Standards
[ADA Title III §36.104] 1991 Standards means requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this...
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
