Product by Panda Windows & Doors Visit www.panda-windows.com for more information!
Search Results "Vertical Platform Lift"
Commonly Searched Documents
- Panda S.85 All Aluminum Slim Profile Lift & Slide System
- Panda S.10 All Aluminum Lift & Slide - Stackable Door System
-
B. Accessible Route
Is there a route to these 5% accessible fixed tables that allows at least 36" clear width and has no abrupt vertical level changes greater than 1/4"?...
-
e-ii
[ADA Standards § 4.7.2] Yes No Note: 1:12 is one inch of vertical height for 12 inches of horizontal distance....
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
11B-602.5 Spout location
The spout shall be located 15 inches (381 mm) minimum from the vertical support and 5 inches (127 mm) maximum from the front edge of the unit, including bumpers....
- BRW1000 Bariatric Wheelchair Scale Demo
-
§382.101(c)
(c) You are using an aircraft subject to an exception from the lift boarding and deplaning assistance requirements under §382.97(a)-(c) of this subpart;...
-
T302.1 General
EXCEPTION: Walking surfaces on lifts shall not be required to comply with T302....
-
R308.1.3 Common Requirements
Boarding and alighting areas and boarding platforms shall comply with R308.1.3....
-
T404.1 General
Boarding and alighting at boarding platforms in level boarding bus systems shall comply with T404....
-
I. Parking Garage
Does the parking garage serving the lodging facility allow at least 98" of vertical clearance for vehicles with raised roofs to approach, use and exit the accessible parking spaces?...
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and 3/4 inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)...
-
609.8 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the grab bar, fastener, mounting device,...
-
MEANS OF EGRESS
A continuous and unobstructed path of vertical and horizontal egress travel from any occupied portion of a building or structure to a public way....
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
MEANS OF EGRESS
A continuous and unobstructed path of vertical and horizontal egress travel from any occupied portion of a building or structure to a public way....
-
§ 37.163(c)
(c) The entity shall ensure that vehicle operators report to the entity, by the most immediate means available, any failure of a lift to operate in service....
-
§ 37.203(b)
(b) The entity shall ensure that vehicle operators report to the entity, by the most immediate means available, any failure of a lift to operate in service....
-
Section 36.211 Maintenance of accessible features (Section-by-Section Analysis)
Other common examples of features that must be maintained, and often are not, are platform lifts and elevators. ...
-
Section 35.133 Maintenance of Accessible Features (Section-by-Section Analysis)
Other common examples of features that must be maintained, and often are not, are platform lifts and elevators....
-
M303.2.4.2 Other Equipment
Wheelchair spaces beneath diagnostic equipment other than breast platforms shall comply with M303.2.4.2....
-
2. Analysis of footrest clearance height and depth
surface of the footrest at the proximal (near) outside corner Both depth dimensions are referenced to the abdomen assuming that the wheelchair occupant makes contact with the breast-platform...