Dining surfaces and work surfaces that are used primarily by children 5 years and younger shall not be required to comply with 902.4 where a clear floor or ground space complying with 305 positioned...
Search Results "Transfer Position"
-
902.4 Dining Surfaces and Work Surfaces for Children's Use
-
407.12.1 Vertical Reference Plane (Section-by-Section Analysis)
407.12.1 Vertical Reference Plane (Section-by-Section Analysis) This section proposes that the positioning of operable parts for side reaches and forward reaches be determined with respect...
-
5.3.3.2 Location Where Walls Provided
Where walls or partitions are provided, the seat shall be positioned with a wall or partition to the rear and to one side of the seat for a left-hand or right-hand approach. ...
-
5.3.3.2 Location Where Walls Provided
Where walls or partitions are provided, the seat shall be positioned with a wall or partition to the rear and to one side of the seat for a left-hand or right-hand approach....
-
§ 38.23(b)(2)(ii) Exception
., “rotary lift”), the requirements of this paragraph prohibiting the lift from being stowed while occupied shall not apply if the stowed position is within the passenger compartment and...
-
11B-902.4 Dining surfaces and work surfaces for children’s use
surfaces that are used primarily by children 5 years and younger shall not be required to comply with Section 11B-902.4 where a clear floor or ground space complying with Section 11B-305 positioned...
-
11B-805.2.2 Beds
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
11B-805.2.2 Beds
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
11B-902.4 Dining surfaces and work surfaces for children’s use
surfaces that are used primarily by children 5 years and younger shall not be required to comply with Section 11B-902.4 where a clear floor or ground space complying with Section 11B-305 positioned...
-
Training
Agreement (for instance, because they were on leave from the University, because they began their affiliation with the University subsequent to the training date, or because they assumed a position...
-
Cybex Total Access Overhead Press Exercise Machine
Choice of Handle Positions Choice of upper and lower handle positions caters to wheelchair users, shorter users and those with reduced balance....
-
Cybex Total Access Lat Pull Exercise Machine
This permits correct pelvic positioning and avoids a round back during exercise....
-
Recommendations
a minimum flat surface of 33 in. length for platforms accommodating wheeled mobility devices excluding scooters aids that can help wheelchair users mount the platform and position...
-
R308.1.2.1 Platform and Vehicle Floor Coordination
Boarding platforms shall be positioned to coordinate with vehicles in accordance with the applicable requirements in 49 CFR parts 37 and 38....
-
12113(c) Qualification standards and tests related to uncorrected vision
selection criteria based on an individual’s uncorrected vision unless the standard, test, or other selection criteria, as used by the covered entity, is shown to be job-related for the position...
-
404.2.7 Door and Gate Hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
-
404.2.7 Door and Gate Hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
-
Conclusion
The opinions expressed herein do not necessarily reflect the position or policy of the U.S. Department of Labor....
-
Is latch-side maneuvering clearance as specified in the Standards applicable to doors with panic bars?
Latch-side clearance not only provides proper positioning at door hardware but also facilitates proceeding through doors against the force of closers....
-
§ 38.159(b)(2)(ii) Exception
., “rotary lift”), the requirements of this paragraph (b)(2) prohibiting the lift from being stowed while occupied shall not apply if the stowed position is within the passenger compartment...
-
11B-813.2.10 Door swing
A door, in any position, shall be permitted to encroach into the turning space by 12 inches (305 mm) maximum....
-
Carr Corporation Narcotics Locker NL10
Keys cannot be removed in the unlocked position. Welded heavy gauge double wall reinforced construction. Full height piano hinge with welded pin. One shelf, height adjustable....
-
11B-904.4.1 Parallel approach
A clear floor or ground space complying with Section 11B-305 shall be positioned for a parallel approach adjacent to the 36 inch (914 mm) minimum length of counter....
-
Eunice Noell-Waggoner, IES, LC. Value, Contrast and Reflections
A negative example is shown in slide 3, left photo; a positive example is shown in slide 3, right photo....
