technical guidance on how to comply with the accessibility requirements of the Fair Housing Amendments Act of 1988 (Fair Housing Act) that are applicable to certain multifamily dwellings designed...
Search Results "Designated Aisle Seat (Assembly)"
-
24 CFR Part 100—Supplement to Notice of Fair Housing Accessibility Guidelines: Questions and Answers about the Guidelines
-
M302.2.4 Transfer Sides (Section-by-Section Analysis)
In the MDE NPRM, the transfer side provision for diagnostic equipment used by patients in the seated position required transfer surfaces to have the option to transfer from a mobility device...
-
§ 38.125(d)(2) Wheelchair or mobility aid spaces
Not more than 6 inches of the required clear floor space may be accommodated for footrests under another seat provided there is a minimum of 9 inches from the floor to the lowest part of...
-
American Standard Right Width 1.28-1.6 gpf FloWise Right Height Elongated Flushometer Toilet
Elongated floor mount flushometer valve toilet, top spud, with seat High Efficiency, Low Consumption operates in the range of 1.28gpf to 1.6gpf (4.8Lpf to 6.0Lpf) Right HeightTM...
-
Neo-Metro Commercial Metaal Toilet 8956 Series
Neo-Metro's Metaal Toilet features an elongated toilet bowl and a unique decorative exposed trap. This version of the toilet is configured for a commercial flush valve. Either a...
-
Neo-Metro Contour Commercial Stainless Steel Toilet 8955 Series
Neo-Metro's Metaal Toilet features an elongated toilet bowl and a unique decorative exposed trap. This version of the toilet is configured for a commercial flush valve. Either a...
-
Neo-Metro Metaal Toilet Configured for In-Wall Flushing System
Neo-Metro's Metaal Toilet features an elongated toilet bowl and unique decoratiive exposed trap. This toilet uses a customer supplied European style In-Wall Flushing...
-
Neo-Metro Euro-Urban Toilet Configured for In-Wall Flushing System
The Euro-Urban Contour toilet is a classic European style toilet, available in an elongated style and can be mounted either on-the-floor or off-the-floor for ease of...
-
M303.4 Components
Where components of diagnostic equipment are used to examine specific body parts, the components shall be capable of examining the body parts of a patient seated in a wheelchair....
-
M303.4 Components
Where components of diagnostic equipment are used to examine specific body parts, the components shall be capable of examining the body parts of a patient seated in a wheelchair....
-
M303.2.3 Wheelchair Spaces / Depth of Wheelchair Spaces for front or Rear Entry
For example, the wheelchair footrests would be allowed to extend beyond the depth of the raised platform and over any edge protection on wheelchair weight scales used by patients seated...
-
M302.2.3 Size
Transfer surfaces shall be 21 inches (610 mm) wide minimum and 17 inches (430 mm) deep minimum. The size of transfer surfaces shall be measured from center points of their opposing...
-
M302.3.2 Leg Supports
Where stirrups are provided, leg supports shall also be provided and comply with M305.4.
-
M302.3 Supports
Transfer supports, leg supports and reclining surfaces shall comply with M302.3.
-
M302.2 Transfer Surface
A transfer surface shall be provided and shall comply with M302.2.
-
M302.3.1 Transfer Supports
Transfer supports shall be provided for use with transfer sides required by M302.2.4 and shall comply with M305.2.1.1, M305.2.2.1, and M305.2.3 through M305.2.8.
-
M302.2 Transfer Surface (Section-by-Section Analysis)
This is an introductory section.
-
M302.3 Supports (Section-by-Section Analysis)
This is an introductory section. An editorial change was made to this section as a result of the change in M302.3.2, described below, to replace the word “stirrups” with the term...
-
Accessible Amusement Rides - A Summary of Accessibility Guidelines for Recreation Facilities
United States Access Board Accessible Amusement Rides: A Summary of Accessibility Guidelines for Recreation Facilities This information has been developed and reviewed in...
-
M302.3.1 Transfer Supports
Transfer supports shall be provided for use with the transfer sides required by M302.2.3 and shall comply with M305.2.
-
M302.2 Transfer Surface
A transfer surface shall be provided and shall comply with M302.2.
-
M302.3 Supports
Transfer supports, armrests, and reclining surfaces shall comply with M302.3.
-
Changes in Level at Entry to Wheelchair Spaces (M303.3)
M303.3 includes technical criteria for changes in level at the entry to a wheelchair space as may occur at wheelchair weight scales with raised platforms. The technical criteria are...
-
1. PURPOSE
These standards are to be applied during the design, construction, and alteration of buildings and facilities to the extent required by the Architectural Barriers Act of 1968, as amended...
