Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
Search Results "Loose Fill Surface"
Filters
Commonly Searched Documents
-
11B-703.4.1 Height above finish floor or ground
-
Whitehall Mfg. 3374-WSF Hot & Cold Hemispherical Widespread Pushbuttons Pneumatic Valve Conical Faucet
As loose components, the spout and pushbutton may be installed with any centerset spacing, however, 4", 6" or 8" centersets are suggested....
-
Story
That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
11B-406.5.6 Grade breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
Landscape Forms Inc. Redline Bench Collection
Optional end arms Optional center arm for 48" length Optional intermediate arms for 70" length Arms are solid steel, welded to seat panel May be specified freestanding, embedded, or surface...
-
AJW Architectural Products U716 Series 16"W x 20"H Channel Frame Mirror w/ Mounted Shelf - Plate Glass Surface
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Frame miters are not ground smooth and polished Multiple reflective surfaces available Unit is equipped...
-
AJW Architectural Products U705 Series 16"W x 30"H Angle Frame Mirror w/ Mounted Shelf - Plate Glass Surface
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Mitered corners are ground and polished smooth Multiple reflective surfaces available Unit is equipped...
-
11B-303.5 Warning curbs
Abrupt changes in level exceeding 4 inches (102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning...
-
Pilot Rock CN-OKR Oak Knoll Collection Trash Receptacle
A top plate of 3/8-in. plate steel with a 10-in. diameter hole for depositing trash which eliminates the need for a separate, loose lid. ...
-
Polling place violations that can be remediated with temporary measures
Henderson Elementary School, 1800 Dismuke Street, Houston, TX Parking: The surface slope in the designated accessible parking space is not level in all directions and exceeds the...
-
STORY
[DSA-AC] That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
11B-705.2 Detectable directional texture
transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars raised 0.2 inch (5.1 mm) from the surface...
-
Counter: ADA Standard Section 904.3.2
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
11B-904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
CURB RAMP
[DSA-AC] A sloping prepared surface, intended for pedestrian traffic, which provides access between a walk or sidewalk and a surface located above or below an adjacent curb face....
-
AJW Architectural Products U190 Series Singlefold Towel Dispenser - Surface Mounted
Product Features Holds 400 single fold towels Fabricated of #22 gauge stainless steel with a #4 satin finish Secured with pin tumbler lock, keyed like all AJW...
-
Bobrick ClassicSeries LiquidMate® Surface-Mounted Soap Dispenser B-156
Corrosion-resistant valve dispenses thin, free-flowing commercially marketed all-purpose hand soaps. Translucent polyethylene container provides visible soap level. 24-fl oz (0.7-L)...
-
Bobrick Surface-Mounted Multi-Roll Toilet Tissue Dispenser B-4288
Satin-finish stainless steel unit with stainless steel dispensing mechanism. Flush tumbler lock. Holds two rolls up to 5 1⁄4" (135mm) diameter (1800 sheets). Extra roll automatically...
-
Norton Surface Mounted Series 5600 Hands-Free Door Operation Kits
The NORTON 5600 Series Hands-Free Kits combine a wave-to-open switch with the 5600 power operator to open the door and provide a ‘clean’ exit without touching hardware. However,...
-
Bobrick Surface-Mounted Multi-Roll Toilet Tissue Dispenser B-2888
Satin-finish stainless steel unit with stainless steel dispensing mechanism. Door has flat face with protruding tumbler lock. Holds two rolls up to 5 1⁄4" (135mm) diameter (1800...
-
Bobrick Surface-Mounted Toilet Tissue Dispenser for Two Rolls B-27460
Vandal-resistant unit: heavy-duty cast aluminum, satin finish. Tumbler lock secures spindles in place. High-impact plastic spindles hold rolls up to 6" (150mm) diameter (2000...
-
Bobrick TrimLine Series ADA Surface-Mounted Hand Dryer B-7120.230V
Durable, 22-gauge, zinc-plated steel with white epoxy cover with black plastic trim, automatic sensor, dual air outlets, 208-240V AC, 6.8-7.8 Amp, 1400-1900 Watts, 50/60 Hz, Single...
-
Bobrick TrimLine Series ADA Surface-Mounted Hand Dryer B-7120.115V
Durable, 22-gauge, zinc-plated steel with white epoxy cover with black plastic trim, automatic sensor, dual air outlets, 115V AC, 15 Amp, 1725 Watts, 50/60 Hz, Single Phase, UL...
-
Gamco Surface Mounted Multi-Roll Toilet Tissue Dispenser - TTD-5
Description Satin-finish stainless steel. Door has tumbler lock. Holds two standard core toilet tissue rolls up to 5 1/4" (135mm) diameter. Extra toilet tissue roll automatically...
