Doors shall comply with the following:
Search Results "Grab Bar Height"
Filters
Commonly Searched Documents
-
1132A.3 Width and height of interior doors and secondary exterior doors
-
Pictogram Field: ADA Standard Section 703.6.1
Pictograms shall have a field height of 6 inches (150 mm) minimum. Characters and braille shall not be located in the pictogram field....
-
AccessaBath Shower Systems
simulated grout lines Knowledgeable customer service personnel Easy to use shower Ideal for bathing safety System includes wall enclosure, shower pan, flexible threshold, seat, grab...
-
11B-705.1.1.1 Dome size
warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and 0.47 inch (11.9 mm) maximum, and a height...
-
Parking sign height measurement technique
502.6 says "Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign." But which floor or ground surface? The...
-
American Specialties Heavy Duty Stainless Steel Soap Dish with Rectangular Solid Bar Model 0398
Requires the Premium User plan or above. (Login or upgrade your account!) -
Rebuilding Together Of the Triangle - Raleigh, NC
outlets & repair unsafe wiring Install appropriate ventilation Replace drywall Patch leaking roofs Build wheelchair ramps Install railings and grab...
-
Guidelines for Requirement 7
This second set of specifications also provides that toilets must be located in a manner that permits a grab bar to be installed on one side of the fixture, and provides specifications on...
-
BACKGROUND
The proposed technical criteria originated from provisions for grab bars in the 2010 Standards....
-
TABLE OF CONTENTS
Lavatories and Mirrors 4.20 Bathtubs 4.21 Shower Stalls 4.22 Toilet Rooms 4.23 Bathrooms, Bathing Facilities, and Shower Rooms 4.24 Sinks 4.25 Storage 4.26 Handrails, Grab...
-
11B-411.2.1.2.3 Accessibility function button
The International Symbol of Accessibility shall comply with Section 11B-703.7.2.1, and shall be 5/8 inch (15.9 mm) minimum in height. The indication shall be three raised dots....
-
Character Proportions: ADA Standard Section 703.2.4
Characters shall be selected from fonts where the width of the uppercase letter “O” is 55 percent minimum and 110 percent maximum of the height of the uppercase letter “I”....
-
Character Proportions: ADA Standard Section 703.5.4
Characters shall be selected from fonts where the width of the uppercase letter “O” is 55 percent minimum and 110 percent maximum of the height of the uppercase letter “I”....
-
General: ADA Standard Section 902.1
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
-
11B-812.7.3 Lettering
The words “NO PARKING” shall be painted on the surface within each access aisle in letters a minimum of 12 inches (305 mm) in height and located to be visible from the adjacent vehicular...
-
11B-225.2.3 Library book stacks
ETA Editor's Note The ADA Advisory identifies library shelving as self-service shelving, which does not have a height limitation....
-
F105.2.2 ASME
The enclosure walls not used for entry or exit are required to have a grab bar the full length of the wall on platform lifts....
-
Allegion Falcon 25 Series Touch Bar Exit Devices
Offices, banks, assisted living facilities, retail stores and other commercial buildings have constant traffic, so door hardware must be able to take continual use and abuse. The...
-
Allegion Falcon 24 Series Touch Bar Exit Device
Offices, banks, assisted living facilities, retail stores and other commercial buildings have constant traffic, so door hardware must be able to take continual use and abuse. The...
-
Allegion Falcon XX Series Cross Bar Exit Devices
For high use areas that demand high-performing products, the Falcon XX Series fills the bill with a sleek, tough and attractive exit device that delivers ANSI Grade 1 performance....
-
604.7 Open Type Toilet Paper Dispenser Height
-
902.3 Baby Changing Table Work Surface Height
