: Hex dogging standard Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Sizes: Field adjustable width, 41" crossbar standard fits 3' 8" x 7' door...
Search Results "Double Door"
-
Allegion Falcon 1990 Series Cross Bar Exit Devices
-
DORMA 8000 Series Exit Device
For paired doors where a full-width opening is only occasionally required, removable mullions are used. Doors are fitted with rim exit devices and normally function as single doors....
-
Figure 404.2.4.1(g) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side with Closer and Latch – Drawing from the U.S. Access Board
-
7(2)(a)
(a) Bathrooms that have reinforced walls for grab bars (see Requirement 6) would meet section 100.205(c)(3)(iv) if: Note: Cabinets under lavatories are acceptable provided the...
-
§100.205(c)
(c) All covered multifamily dwellings for first occupancy after March 13, 1991 with a building entrance on an accessible route shall be designed and constructed in such a manner that—
-
The Perils Of Slope
Requires the Registered User plan or above. Login! -
Allegion Falcon 2390 Series Recessed Exit Device
The best available recessed concealed device for stile and rail doors....
-
Road Closure Drawings
Many forest roads are closed to motor vehicle traffic by gates or other types of barriers. Often, foot travel is allowed beyond the restriction device. When foot travel is encouraged...
-
T204.2 Doorways with Lifts, Ramps or Bridgeplates
Doorways with lifts or ramps shall comply with T502.2.
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
PRL Glass Systems Inc. Panic Device PL-100 Series
These panic are a contemporary design offered primarily for all Glass Door/Entrance Systems with a minimal latch mechanism....
-
Yale 1500 Series Traditional Exit Devices
Lever, knob, handle and pull trim designs offer variety and permit hardware balance throughout a building 2-point hex-key dogging for standard devices allows quiet push-pull door...
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
Allegion Von Duprin 88 Series Cross Bar Exit Device
Exit devices are a critical part of a door opening or access system and will provide safe and reliable service when properly applied and maintained....
-
Allegion Falcon 1790 Series Exit Devices
standard, except EL where must use hold back feature Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Sizes: 30", 36", 42", and 48" Doors...
-
Allegion Falcon 1490 Series Exit Devices
Sizes: 36", 42", 48" Doors: 1 3/4" thick metal doors-specify if other than 1 3/4" Projections: 2 3/4" maximum, 2" when dogged....
-
Elevator Doors
Section 407.3.1 recognizes acceptable types of elevator doors. The proposed rule recognized horizontal sliding doors....
-
Bradley Chrome-Plated Double Hook 914
Bradley Chrome-Plated Double Hook Model 914 Surface-Mounted - Exposed Mounting Chromed-Plated Brass Double Hook...
-
Allegion Falcon 1690 Series Exit Devices
The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use....
-
Attachment H: Modifications to Altered Facilities
Attachment H: Modifications to Altered Facilities
-
TownSteel MS Series, Grade 1 with Push Pull Mortise Locks
It is offered in a variety of functions and configurations, to meet the most demanding door control applications....
-
Employee Work Areas: ADA Standard Section 203.9
Section 203.9 covers scoping requirements of general exceptions for employee work areas in the most current ADA Standards.
