Offset sink strainer wheelchair offset. Allows up to 11" offset for wheelchair access use of most ADA sinks....
Search Results "Wheelchair Space (Recreation)"
Commonly Searched Documents
- McGuire Manufacturing Co., Inc. 1000WC: Offset Strainer - Offset Only
-
Van Accessible Parking Spaces [§502.1 - 502.5]
Van Accessible Parking Spaces [§502.1 - 502.5] At least one space for every 6 or fraction of 6 accessible spaces must be van accessible....
-
7.4.5 Passing Spaces
Trails with a clear tread width less than 60 inches (1525 mm) shall provide passing spaces complying with 7.4.5 at intervals of 1000 feet (300 m) maximum. ...
-
Section 36.311 Mobility Devices (Section-by-Section Analysis)
Section 36.311 set forth specific requirements for the accommodation of mobility devices, including wheelchairs, manually-powered mobility aids, and other power-driven mobility devices....
- Landscape Forms Inc. Select Modular Steel Recycling Units
- Magnuson Group UMEA Waste Receptacles
-
1017.4.1 Size
The passing space shall be either: 1. A space 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum; or 2....
-
1017.4.1 Size
The passing space shall be either: 1. A space 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum; or 2....
-
4.16.2 Clear Floor Space
Clear floor space for water closets not in stalls shall comply with Fig. 28. Clear floor space may be arranged to allow either a left-handed or right-handed approach....
-
1014.2.2 Roll-in Access
Where roll-in access is provided, this section requires a level or sloped entry route complying with the technical requirements for outdoor recreation access routes in 1016 or trails in...
-
11B-703.2.8 Line spacing
11B-703.2.8 Line spacing....
-
11B-206.4.5 Tenant spaces
[2010 ADAS] 206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
11B-206.4.5 Tenant spaces
[2010 ADAS] 206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
11B-206.4.5 Tenant spaces
[2010 ADA Standards] 206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
1133A.2 Clear floor space
Clear floor space at kitchens shall comply with the following:...
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height. [S.H. ...
-
703.5.9 Line Spacing
703.5.9 Line Spacing. Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
-
Machinery Spaces (§203.5)
Machinery Spaces (§203.5) Spaces used only by service personnel for maintenance, repair, or occasional monitoring of equipment Examples: elevator pits/ penthouses, mechanical/...
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-813.2.9 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
A4.6.3 Parking Spaces
However, this aisle does not permit lifts or ramps to be deployed and still leave room for a person using a wheelchair or other mobility aid to exit the lift platform or ramp....