Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
Search Results "Floor Button"
Commonly Searched Documents
-
11B-611.4 Height
-
Multi-Story Buildings and Facilities: ADA Standard Section 206.2.3
Section 206.2.3 covers the scoping requirements in the most current ADA Standards for accessible routes within multi-story buildings and facilities
-
Homemods.org
., sleeping on the first instead of second floor) and renovations (e.g., installing a roll-in shower)....
- Pressalit Care Nursing bench 2000, electrically height adjustable
-
11B-604.8.1.4 Toe clearance
At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition...
-
11B-407.4.7.2 Keypads
Keypads shall be identified by characters complying with Section 11B-703.5 _|Signs; Visual Characters|_ and shall be centered on the corresponding keypad button....
-
v. Infusion pumps
Infusion pumps often rely on patients controlling settings on difficult-to-reach buttons or flat screens that may not be accessible to individuals with disabilities....
-
FAQ: How do I create a WorkGroup in Corada?
Click the "Save WorkGroup" button. Note: This feature is available to Premium- and Accessibility Specialist-level subscribers only. Need to upgrade your subscription? Click here!...
-
Two-Way Communication Systems [§230 and §708]
Control buttons and other operable parts must comply at those systems located at accessible entrances....
-
Can elevator doors close sooner than the minimum opening time specified when users activate door close?
automatic operation) cannot reduce the initial opening time of doors (3 seconds minimum) or the minimum door signal timing (based on 1.5/ ft/s travel speed for the distance from the hall call button...
-
11B-407.4.7.2 Keypads
Keypads shall be identified by characters complying with Section 11B-703.5 _|Signs; Visual Characters|_ and shall be centered on the corresponding keypad button....
-
11B-407.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
Accessible Pathway & Corridor: Minimum Clear Floor Space Required for 360-degree Turn
This data depicts the amount of space required by users of wheeled mobility devices to perform a 360-degree turn. The bold dashed line in the table and figure indicates the...
-
11B-704.2.1.2 Forward approach
Where a forward approach is provided at a telephone within an enclosure, the counter may extend beyond the face of the telephone 20 inches (508 mm) into the required clear floor or ground...
-
Signal Type: ADA Standard Section 407.4.8.2.1
Section 407.4.8.2.1 covers the current ADA Standards for the signal type of audible elevator car indicators.
-
11B-809.10.6.4 Reinforcement for grab bars
grabs bars shall comply with the following: Continuous reinforcement shall be installed in the walls of showers 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor...
- Collapsible Water Retainer Shower Dam for Shower Threshold Information Video
- Willoughby Industries WAW-2333 AquaWave® Three Station Solid Surface Lavatory System
- Willoughby Industries WAW-2322 AquaWave® Two Station Solid Surface Lavatory System
-
FAQ: I uploaded a resume, profile photo and/or entered a bio. How do I make it public or private?
Click the "Update Privacy Settings" button....
-
11B-306.3.1 General
Space under an element between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground shall be considered knee clearance and shall comply with Section 11B-306.3....
-
Toe Clearance: ADA Standard Section 604.8.1.4
Section 604.8.1.4 covers the current ADA Standards for toe clearance at wheelchair accessible compartments.
-
Dispensers: ADA Standard Section 604.7
Section 604.7 covers the current ADA Standards for toilet paper dispensers.
-
Vertical Clearance: ADA Standard Section 307.4
Section 307.4 covers the current ADA Standards for vertical clearance.