The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
Search Results "Expected Maximum Flight Duration"
-
11B-1002.5.2 Transfer height
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-813.2.6 Shelf
No fewer than one shelf shall be provided in close proximity to the changing table at 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
11B-604.9.3 Height
The height of water closets shall be 11 inches (279 mm) minimum and 17 inches (432 mm) maximum measured to the top of the seat....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
604.9.3 Height
The height of water closets shall be 11 inches (280 mm) minimum and 17 inches (430 mm) maximum measured to the top of the seat....
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
703.5.4 Character Proportions
Characters shall be selected from fonts where the width of the uppercase letter "O" is 55 percent minimum and 110 percent maximum of the height of the uppercase letter "I"....
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
703.2.4 Character Proportions
Characters shall be selected from fonts where the width of the uppercase letter "O" is 55 percent minimum and 110 percent maximum of the height of the uppercase letter "I"....
-
Sections 35.108(d)(1)(v) and 36.105(d)(1)(v)—Comparisons to Most People in the Population, and Impairment Need Not Prevent or Significantly or Severely Restrict a Major Life Activity
A few commenters raised concerns that are further addressed in the ‘‘Condition, manner, or duration’’ section below, regarding the Department’s inclusion in the NPRM preamble of a reference...
-
TSA Cares: Passenger Support
Call 72 hours prior to traveling with questions about screening policies, procedures and what to expect at the security checkpoint....
-
American Standard Colony PRO Two-Handle Kitchen Faucet with High-Arc Swivel Spout 7074.550
A maximum flow rate of 1.5 gallons per minute helps to save water when compared to a standard 2.2 gpm faucet, without sacrificing performance – and our innovative quick-spin nuts make installation...
-
Smith System Trespa Planner Science Table 48″ Deep
This science table combines maximum strength, stability and durability....
-
Kawneer North America 1040 Sliding Mall Front Door
The heavy-duty aluminum framing permits the use of larger panel sections with maximum structural integrity....
-
706.4 Sound Pressure Level
Assistive listening systems shall be capable of providing a sound pressure level of 110 dB minimum and 118 dB maximum with a dynamic range on the volume control of 50 dB....
-
R302.5.2 Not Within Street or Highway Right-of-Way
Where pedestrian access routes are not contained within a street or highway right-of-way, the grade of pedestrian access routes shall be 5 percent maximum....
-
T304.4 Operation
The force required to activate operable parts shall be 5 lbf (22.2 N) maximum....
-
11B-309 Operable parts
SECTION TITLE NOTES 11B-309 Operable parts Adds to existing exception for 5 lb. maximum operating...
-
11B-1009.6.2 Handrails
The width between handrails shall be 20 inches (508 mm) minimum and 24 inches (610 mm) maximum....
-
11B-704.2.1.1 Parallel approach
Where a parallel approach is provided, the distance from the edge of the telephone enclosure to the face of the telephone unit shall be 10 inches (254 mm) maximum....
-
4.26.3(1)
(1) Bending stress in a grab bar or seat induced by the maximum bending moment from the application of 250 lbf (1112N) shall be less than the allowable stress for the material of the grab...
-
A4.3.1(2) Sites
Level, indirect routes or those with running slopes lower than 1:20 can sometimes provide more convenience than direct routes with maximum allowable slopes or with ramps....
