Rather, it is a discussion of identifiable incremental costs that may arise as a result of compliance with the ADA Amendments Act and these implementing regulations....
Search Results "Compliance"
Filters
Commonly Searched Documents
-
V. Background on This Rulemaking and Public Comments Received
-
Sections 5 Through 9 (Section-By-Section Analysis and Response to Comments)
At counters such as bank teller windows or ticketing counters, alternative methods of compliance are permitted....
-
Commercial Facilities in Private Residences (Section-By-Section Analysis and Response to Comments)
Likewise, if a homeowner alters a portion of his home to convert it to a commercial facility, that work must be done in compliance with the alterations standards in appendix A....
-
68.65. Advisory Committee
(c) Recommendations of the committee will be transmitted to the Commission by the Executive Director through the Director of the Compliance Division....
-
28 CFR Part 35 Nondiscrimination on the Basis of Disability in State and Local Government Services (2010 ADA Title II Regulations with amendments issued through Aug. 2016)
order to adopt enforceable accessibility standards under the ADA that are consistent with the minimum guidelines and requirements issued by the Architectural and Transportation Barriers Compliance...
-
1015.3 Height
ETA Editor's Note Sections from California Building Code Chapter 10 that are not adopted by the Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
Section 37.93 One Car Per Train Rule
In this case, since all new rail vehicles have to be accessible, compliance with this provision is straightforward....
-
Intent
This Guide includes Advisories from the State of California Division of the State Architect - Access Compliance (DSA-AC), U.S. Department of Justice (DOJ), and U.S. Access Board. ...
-
Readily Achievable (Section-by-Section Analysis)
The Board expects that the FCC will set forth the factors which it will use to judge compliance....
-
BACKGROUND
As vacant space becomes occupied, FBE will make certain that the space is brought into full ADA compliance....
-
Side reach (Section-by-Section Analysis)
Many jurisdictions have already incorporated this requirement into their building codes, which these commenters believed would reduce the cost of compliance with the 2010 Standards....
-
6. Settlement Approval Process
The City shall pay the costs for the publication of the notice described in this Section, but the City, upon the commencement of the Compliance Period, shall be reimbursed for all such incurred...
-
Section 36.304 Removal of Barriers (Preamble, Section-by-Section Analysis)
Some urged that the rule require public accommodations to assess their compliance on at least an annual basis in light of changes in resources and other factors that would be relevant to...
-
11B-202.4 Path of travel requirements in alterations, additions and structural repairs
When the cost of full compliance with Section 11B-202.4 would exceed 20 percent, compliance shall be provided to the greatest extent possible without exceeding 20 percent....
-
TownSteel XCE9010 Cylindrical Lockdown Rigid Trim Keypad Cylindrical
CODE COMPLIANCE ANSI/BHMA A156.2: A156.2-2011 Grade 1 certified ANSI/BHMA A156.25: Meets or exceeds all applicable requirements UL/ULC: UL 10C 3-hour rated BAA: Meets guidelines of the...
-
TownSteel XCE9020 Cylindrial Lockdown Clutched Trim Cylindrical Keypad
CODE COMPLIANCE ANSI/BHMA A156.2: A156.2-2011 certified ANSI/BHMA A156.25: Meets or exceeds all applicable requirements UL/ULC: UL 10C 3-hour rated BAA: Meets guidelines of the Buy American...
-
Ampetronic ILD100 Small Area, VOX Switching Audio Induction Loop Driver Hearing System
Standards compliance The ILD100 is CE marked to all relevant safety and EMC standards....
-
TownSteel MSE-32-DI Classroom Intruder with Indicator on Both Sides Mechanical Mortise
keyway, 6pin, 2 keys per cylinder High Security SFIC Available, TownSteel "L" keyway, 7pin, 2 keys per cylinder Keying KD standard, KA, MK, GMK, GGMK, Construction Available Code Compliance...
-
TownSteel CDC-110 Classroom Instruder Mechanical Cylindrical
Code Compliance ANSI/BHMA A156.2-2011 4000 Series Grade 1 Certified UL UL 10C 3 Hour Rated ADA Meet Requirements of The Americans with Disabilities Act BAA Meet Guidelines of The...
-
TownSteel XCE9030 Cylindrical Lockdown Rigid Trim Security Cylinder Cylindrical Keypad
CODE COMPLIANCE ANSI/BHMA A156.2: A156.2-2011 Grade 1 certified ANSI/BHMA A156.25: Meets or exceeds all applicable requirements UL/ULC: UL 10C 3-hour rated BAA: Meets guidelines of the...
-
Non Slip Safety Solutions
professional application specialists who will provide a solid foundation for slip/fall prevention by: Increasing the Co-efficient of Friction (C.O.F.) of the floor surface to a safety compliance...
-
Regulatory Flexibility Act
., average-sized) facilities/entities); Description of the projected reporting, record-keeping, and other compliance requirements of the proposed rule, including an estimate of the...
-
Regulatory Flexibility Act
Description of the projected reporting, record-keeping, and other compliance requirements of the proposed rule, including an estimate of the classes of small entities that will be subject...
-
R202 Alterations and Elements Added to Existing Facilities (Section-by-Section Analysis)
Where existing physical constraints make it impractical for altered elements, spaces, or facilities to fully comply with new construction requirements, compliance is required to the extent...
