The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater than 1/4 inch high, shall have a clear width of 30 inches and...
Search Results "Clear"
Commonly Searched Documents
- 
    
  
  § 38.125(c)(2) Ramp surface
  
- 
    
  
  11B-1008.4.4 Entry points and seats
  Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground... 
- Inpro Corporation IPC® HR9 Northern Hardwoods® Real Wood Handrail
- Sennheiser SI 29-5 Five-Channel Modulator
- Gamco Surface-Mounted Vertical Tank Type Soap Dispenser with All-Purpose Valve - G-16AP
- Activar Hiawatha DBP004 Door Bottom Edge with Kickplate for 1-3/4” Door
- 
    
  
  Ramps
  For each elevated ramp run: 12-inch (305 mm) maximum rise 1:12 maximum slope 36-inch (915 mm) minimum clear width ... 
- 
    
  
  608.2.2 Standard Roll-In Type Shower Compartments
  Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides... 
- 
    
  
  11B-707.3 Operable parts
  Unless a clear or correct key is provided, each operable part shall be able to be differentiated by sound or touch, without activation.... 
- 
    
  
  11B-802.1.4 Approach
  Because accessible routes serving wheelchair spaces are not permitted to overlap the clear floor space at wheelchair spaces, access to any wheelchair space cannot be through another wheelchair... 
- 
    
  
  §382.57(c)(6)(iv)(B) Tactile symbols
  Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised... 
- 
    
  
  1003.3 Clearances
  Although the minimum width of the clear pier space is 60 inches (1525 mm), it is recommended that piers be wider than 60 inches (1525 mm) to improve the safety for persons with disabilities... 
- 
    
  
  608.2.3 Alternate Roll-In Type Shower Compartments
  Alternate roll-in type shower compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides.... 
- 
    
  
  1003.3 Clearances
  Although the minimum width of the clear pier space is 60 inches (1525 mm), it is recommended that piers be wider than 60 inches (1525 mm) to improve the safety for persons with disabilities... 
- 
    
  
  R405.3.3 Minimum Required Depth
  Where knee clearance is required under an element as part of a clear space, the knee clearance shall be 280 mm (11 in) deep minimum at 230 mm (9 in) above the finish surface, and 205 mm... 
- 
    
  
  §27.71(k)(6)(iv)(B) Tactile symbols.
  Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised... 
- 
    
  
  § 27.71(k)(6)(iv)(B) Tactile symbols
  Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised... 
- 
    
  
  § 382.57(c)(6)(iv)(B) Tactile symbols
  Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised... 
- 
    
  
  802.1.4 Approach
  Because accessible routes serving wheelchair spaces are not permitted to overlap the clear floor space at wheelchair spaces, access to any wheelchair space cannot be through another wheelchair... 
- 
    
  
  707.6.3.2 Tactile Symbols
  Function key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised... 
- 
    
  
  1008.4.4 Entry Points and Seats
  Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (280 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground... 
- 
    
  
  4.2.5* Forward Reach
  If the clear floor space only allows forward approach to an object, the maximum high forward reach allowed shall be 48 in (1220 mm) (see Fig. 5(a)).... 
- 
    
  
  11B-802.1.4 Approach
  Because accessible routes serving wheelchair spaces are not permitted to overlap the clear floor space at wheelchair spaces, access to any wheelchair space cannot be through another wheelchair... 
