Construction Specification Institute While developing suggested tolerances for surface materials, the Construction Specifications Institute developed a suggested method for measuring ramp slopes...
Search Results "Shower Slope"
Commonly Searched Documents
-
Construction Specification Institute
-
5.8.2.7 Base Support Allowance Recommendation
The Committee also discussed adding an allowance for a sloped region at the base of the gantry....
-
Legislation
The current ADAAG guidelines (Table 1) provide a description of the suggested width and slope, but do not provide guidance on pathway roughness except that obstacles should be no more than...
-
6. Recognize that Proper Installation of Play Surface Systems is Key
Site plans and construction drawings should provide details like maximum running slopes and cross slopes, beveled edges, transitions, adjoining seams and affixing the surface material to...
-
Salsbury Industries See Through Metal Locker
Requires the Registered User plan or above. Login!
-
Accessible Cells in Detention and Correctional Facilities (Section-by-Section Analysis)
reviews of jails, prisons, and other detention and correctional facilities, the Department has found that many detention and correctional facilities have too few or no accessible cells and shower...
-
Implications
The initiation of the surface deficiency score can quantify where the surface samples fail to comply with the standards for slope, cross slope, vertical change in level, or openings in the...
-
Time periods
establishes accessibility requirements for new construction and alterations, requires that all newly constructed or altered streets, roads, or highways must contain curb ramps or other sloped...
-
Section 36.211 Maintenance of accessible features (Section-by-Section Analysis)
Section 36.211(a) broadly covers all features that are required to be accessible under the ADA, from accessible routes and elevators to roll-in showers and signage. ...
-
Section 35.133 Maintenance of Accessible Features (Section-by-Section Analysis)
Section 35.133(a) broadly covers all features that are required to be accessible under the ADA, from accessible routes and elevators to roll-in showers and signage. ...
-
1011.2.1 Size and Location
At rinsing showers, the size of the clear ground space is based on the dimensions for turning space in 304.3.1 of the Architectural Barriers Act Accessibility Guidelines to enable individuals...
-
Thresholds at Exterior Doors/Thresholds to Balconies or Decks
The Guidelines further provide that the finished surface of this area, located immediately outside the entry door, may be sloped for drainage, but the sloping may be no more than 1/8 inch...
-
11B-206.2.1 Site arrival points
(1) Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped areas at any intersection having curbs or other barriers to entry from a street...
-
1.0 APPLICATION
While the new or altered furnishing must be accessible the clear floor or ground space shall not be required to comply with surface and slope requirements until the surface and slope alteration...
-
Selection of Locations
The 11 test plots were installed in a previously undisturbed wetlands area where the maximum running slope of any of the sections was 7.6 percent....
-
11B-206.2.1 Site arrival points
(1) Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped areas at any intersection having curbs or other barriers to entry from a street...
- Rebuilding Together Kent County - Chestertown, MD
- Assisted Living Directory - Minnesota Assisted Living Facilities & Senior Care
-
1007.1 Accessible means of egress required
In assembly areas with sloped or stepped aisles, one accessible means of egress is permitted where the common path of travel is accessible and meets the requirements in Section 1028.8, and...
-
Fishing piers and platforms. (Section-by-Section Analysis)
attached to land) are involved, a number of exceptions are provided from the general standards for accessible routes in order to take into account the difficulty of meeting accessibility slope...
-
Fishing piers and platforms. (Section-by-Section Analysis)
attached to land) are involved, a number of exceptions are provided from the general standards for accessible routes in order to take into account the difficulty of meeting accessibility slope...
-
Location
The slope along the accessible route should not be greater than 1:12 in the direction of travel....
-
Technical Infeasibility
plumbing, life safety or other codes (such as when combining two toilet stalls to create an accessible stall would violate the plumbing code’s required fixture count); meeting slope...