routes, clear floor space and clearances required at other fixtures, and the turning space....
Search Results "Hinge Side Clearance"
-
604.3.2 Overlap
-
§ 37.42(e)(2)
(2) If the six-foot clearance is not feasible (e.g., where such a clearance would create an insurmountable gap on a mini-high platform or where the physical structure of an existing station...
-
§ 37.42(e)(2)
(2) If the six-foot clearance is not feasible (e.g., where such a clearance would create an insurmountable gap on a mini-high platform or where the physical structure of an existing station...
-
11B-1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
11B-1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
11B-206.2.12 Court sports
In court sports, at least one accessible route shall directly connect both sides of the court....
-
Court Sports: ADA Standard Section 206.2.12
Section 206.2.12 covers scoping requirements in the most current ADA Standards for accessible routes to court sports.
-
11B-206.2.12 Court sports
In court sports, at least one accessible route shall directly connect both sides of the court....
-
Approach: ADA Standard Section 1002.4.6
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
Car Controls: ADA Standard Section 408.4.6
Section 408.4.6 covers the current ADA Standards for the car controls in limited-use/limited-application elevators.
-
Fixtures
Fixtures TAS 604.3.2 also allows the clear floor space and clearances required at other “fixtures” to overlap the water closet clearance....
-
1129B.3, Item 2
One in every eight accessible spaces, but not less than one, shall be served by a loading and unloading access aisle 96 inches (2438 mm) wide minimum placed on the side opposite the driver's...
-
Landings: ADA Standard Section 406.4
Section 406.4 covers the current ADA Standards for curb ramp landings.
-
11B-410.6 Doors and gates
Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
11B-410.6 Doors and gates
Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
604.3.2 Overlap
routes, clear floor space and clearances required at other fixtures, and the turning space....
-
11B-604 Water closets and toilet compartments
routes, clear floor space and clearances required at other fixtures, and the turning space....
-
11B-608.5.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum...
-
11B-608.5.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum...
-
ASI Global Partitions High Density Polyethylene Solid Plastic Toilet Partitions
Construction Features: 8” Aluminum Wrap-Around Hinge Mainstream choice....
-
Whitehall Mfg. WH2125A On-Floor Bariatric Stainless Steel Toilet
The fixture, without the optional -HSBJ hinged seat) shall withstand loads up to 2,000 pounds (907.1 kg) with no measurable deflections....
-
citEcar ADA Enclosed Shuttle 11P 1WC
Body: Steel framework + fiberglass Roof: Fiberglass Windshield: DOT glass Seat backrest and cushion: Artificial leather Floor: Non-slip plastic Side mirror: One piece on each side...
-
1011.3 Operable Parts
Trash and recycling receptacles with hinged lids and controls to keep out large animals shall comply with 309.4 to the extent practicable. 3. ...
-
T502.4 Doorways with Steps on Over-the-Road Buses
Hinges and other door mechanisms shall be permitted to protrude 4 inches (100 mm) maximum into the door opening clear width at or below 48 inches (1220 mm) in height measured from the lowest...
