Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.
Search Results "Fixed Assembly Seating"
-
M305.2.1.1 End Transfer Supports
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer...
-
Requirement 6 -- Reinforced Walls for Grab Bars
[See subsections ...]
-
§ 36.308(b) New construction and alterations
The provision and location of wheelchair seating spaces and companion seats and designated aisle seats in newly constructed or altered assembly areas shall be governed by the standards for...
-
219 Assistive Listening Systems
This section covers requirements for assistive listening systems and receivers in assembly areas....
-
1009.4.2 Area of refuge
Areas of refuge are not required at elevators serving smoke-protected or open-air assembly seating areas complying with Sections 1029.6.2 and 1029.6.3....
-
§ 36.406(f)(2)
(2) In assembly areas that are required to horizontally disperse wheelchair spaces and companion seats by section 221.2.3.1 of the 2010 Standards and that have seating encircling, in whole...
-
M305.2.4.2 Non-Circular Cross Section
Transfer supports with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8...
-
5.4.8 Transfer Support Gripping Surface Hazard Recommendation for M301 and M302
5.4.8 Transfer Support Gripping Surface Hazard Recommendation for M301 and M302 Description: Gripping surface hazards are sharp or abrasive elements that prevent an individual...
-
5.1.3 Transfer Surface Low Height
5.1.3 Transfer Surface Low Height. No agreement on final low height
-
5.1.2 Transfer Surface High Height
5.1.2 Transfer Surface High Height. The transfer surface should have an adjustable height range with an upper height measuring at least 25 inches.
-
5.1.1 Transfer Surface Height Adjustability
5.1.1 Transfer Surface Height Adjustability. The transfer surface should have an adjustable height in small virtually continuous increments.
-
Priority 2: Access to Goods & Services
Word Fillable Form (2.5MB) Word Non-Fillable Form (2.4MB) PDF Non-Fillable Form (1.4MB)
-
Can Resetting Firefox Fix Problems in the Browser?
Indeed, a Mozilla reset can be the right solution for a lot of typical issues that come up with a browser, like random crashing, freezing, settings that have gone bad, behavior that...
- AccessRec LLC WaterWheels, the Floating Beach Wheelchair - Assembly
- AccessRec LLC WaterWheels, the Floating Pool Wheelchair - Assembly
-
Can an operator require a person to transfer from a wheelchair to a vehicle seat?
Section 37.165(e) of the DOT ADA regulations allows persons who use wheelchairs to transfer to a vehicle seat, if one is available....
-
Can an operator require a person to transfer from a wheelchair to a vehicle seat?
Section 37.165(e) of the DOT ADA regulations allows persons who use wheelchairs to transfer to a vehicle seat, if one is available....
-
Scoping [4.1.3(5)]
In new construction, platform lifts can be used instead of ramps or elevators only in providing access to: performing areas in assembly occupancies wheelchair seating locations...
-
§ 37.167(j)(4)
(4) In all signage designating priority seating areas for elderly persons and persons with disabilities, or designating wheelchair securement areas, the entity shall include language informing...
-
3.2 Grandville Cinemark 20, 3728 Rivertown Parkway, Grandville, Michigan
- In Auditoria 2, 3, 4, 5, 7, 9, 12, 14, 16, 17, 18, and 19, fixed companion seats shall be added to provide one fixed companion seat next to each wheelchair space....
-
5.1 Transfer Surface Height
5.1 Transfer Surface Height
-
Basic Components for Accessible and Usable Public and Common Use Areas or Facilities
[See subsections ...]