, such as visual alarms and telephones equipped with volume controls, to accommodate persons with hearing impairments (232.2.2)....
Search Results "Telecommunications Equipment Manufacturer"
Filters
Commonly Searched Documents
-
232 Detention and Correctional Facilities
-
413.1 General (Section-by-Section Analysis)
captioning and audio description on devices used to watch video programming, including analog and digital televisions, tuners, personal video display devices, converter boxes, and computer equipment...
-
Using the Conditions for an Exception in FSORAG
A contractor's or designer's preference for the larger equipment doesn't by itself trigger the condition for an exception....
-
Specifications for Alternate Roll-in Shower Controls
In the final rule, the Board has clarified these specifications and provided more detail on their location depending on whether the shower is equipped with a seat....
-
M304.2 Standing Surface (Section-by-Section Analysis)
the Board has determined that as previously drafted this provision unintentionally placed requirements on the facility floor, as opposed to restricting the requirements to the diagnostic equipment...
-
Assumptions
specifications are used to determine the safety and accessibility of each surface: ASTM F1292‒99/04 Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment...
-
Head and Back Support (M301.3.3 and M302.3.3)
Where diagnostic equipment used by patients in a supine, prone, or side-lying position, and diagnostic equipment used by patients in a seated position can be adjusted to reclined positions...
-
§382.125(c)
checking and timely return of passengers' wheelchairs, other mobility aids, and other assistive devices as close as possible to the door of the aircraft, so that passengers may use their own equipment...
-
Volume Control
Telephones, where provided within cells, must be equipped with volume controls (807.3.2). In the proposed rule, this requirement applied to telephones that are "permanently installed."...
-
E202.5 ICT Functions Located in Maintenance or Monitoring Spaces
Where status indicators and operable parts for ICT functions are located in spaces that are frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment...
-
407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of 1/2 inch (13 mm) under rated loading to...
-
AUTOMATIC DOOR
A door equipped with a power operated mechanism and controls that open and close the door automatically upon receipt of a momentary actuating signal....
-
Within a Site: ADA Standard Section 206.2.2
Section 206.2.2 covers the scoping requirements for accessible routes within a site in the most current ADA Standards.
-
Dispersion: ADA Standard Section 235.2.1
Section 235.2.1 covers scoping requirements in the current ADA Standards for dispersion of boat slips.
-
11B-806.3 Guest rooms with communication features
In guest rooms required to have accessible communication features, consider ensuring compatibility with adaptive equipment used by people with hearing impairments....
-
SECTION 3101B SCOPE
this chapter shall apply to the construction, installation, renovation, alteration, addition, relocation, replacement or use of any public pool and to its ancillary facilities, mechanical equipment...
-
F.1. - Under what circumstances may an agency conclude that no EIT is available that meets the Access Board’s technical provisions?
However, as manufacturer offerings of products that meet the applicable technical provisions increase over time, incidents of nonavailability will decrease....
-
a) Enforcement
Risk management is the responsibility of the architects, engineers, interior designers, landscape architects, contractors, subcontractors, vendors, product manufacturers, building owners...
-
Segway Human Transporter
are on one axle, it can turn in place with no turning radius.(19) The Segway HT easily can be governed to travel at various speeds up to a maximum of 12.5 mi/h (20 km/h).(19) The manufacturer...
-
Enforcement
Risk management is the responsibility of the architects, engineers, interior designers, landscape architects, contractors, subcontractors, vendors, product manufacturers, building owners...
-
7.2 Technological and Scientific Considerations
7.2 Technological and Scientific Considerations As described in Section 4.3.2, some types of current diagnostic imaging equipment present serious technical, scientific, and design impediments...
-
Work Areas (Section-By-Section Analysis and Response to Comments)
Paragraphs (3) and (4) of the proposed rule, concerning fixtures and equipment, are not included in the rule or in ADAAG....
-
206.2.8 Employee Work Areas
Common use circulation paths located within employee work areas that are an integral component of work area equipment shall not be required to comply with 402. 3....
-
206.2.8 Employee Work Areas
Common use circulation paths located within employee work areas that are an integral component of work area equipment shall not be required to comply with 402. 3....