Seats at the head of the tub are limited to a 15 inch depth so that back support is available from the side wall (which is why grab bars cannot be placed on the seat wall)....
Search Results "Positioning Support"
Filters
Commonly Searched Documents
-
Grab Bars [4.20.4] and Controls [4.20.5]
-
Accessible Exterior Surfaces Technical Article
Architectural and Transportation Barriers Compliance Board Washington, DC Contract # QA96005001 21 June 1999 This material is based upon work supported by the U.S....
-
Enshrining the ADA: House-Senate Conference and the Signing
But the Chapman amendment passed in the House threatened to kill the bill: the disability community and its congressional sponsors decided not to support an ADA with the amendment....
-
Hand Cycles (Stand-Alone)
Additional support, as required, is provided by small caster wheels that are mounted on each side just behind the seat....
-
6. Classroom Acoustics
The Board is undertaking rulemaking to address acoustics in classrooms by referencing a voluntary consensus standard developed by the Acoustical Society of America (ASA) with support from...
-
§ 38.159(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds (445 N) concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure...
-
11B-307.2 Protrusion limits
For example, awnings and their supporting structures cannot reduce the minimum required vertical clearance....
-
6. Classroom Acoustics
The Board is undertaking rulemaking to address acoustics in classrooms by referencing a voluntary consensus standard developed by the Acoustical Society of America (ASA) with support from...
-
11B-307.2 Protrusion limits
For example, awnings and their supporting structures cannot reduce the minimum required vertical clearance....
-
11B-703.7.2.5 Cleaner Air Symbol
The symbol, which shall include the text “Cleaner Air” as shown, shall be displayed either as a negative or positive image within a square that is a minimum of 6 inches (152 mm) on each...
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
May employers subject employees to periodic alcohol testing?
In determining whether to subject such an employee to periodic alcohol testing, the employer should consider the safety risks associated with the position the employee holds, the consequences...
-
Substantive changes made to requirements for elevators
specification concerning objects located below hall call buttons (407.2.2 in the proposed rule) modification of specifications for audible hall signals (407.2.2.3) and audible car position...
-
Specifications for Alternate Roll-in Shower Controls
Showers, like bathtubs, are required to be equipped with movable shower spray units that can be used as a fixed-position shower head and a hand-held shower (608.6)....
-
1002.5 Amusement Ride Seats Designed for Transfer
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
408.4.1 Car Dimensions and Doors
Car doors shall be positioned at the narrow ends of cars and shall provide 32 inches (815 mm) minimum clear width. EXCEPTIONS: 1....
-
Driving Ranges
This will allow a person who plays golf from a golf car to practice driving a golf ball from the same position and stance used when playing the game....
-
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301)
For stretchers with a shorter wheelbase than “standard,” the clearance for a lift may use both the clearance in the base and the clearance around the base to position the lift around the...
-
1002.5 Amusement Ride Seats Designed for Transfer
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
Facility
A clear floor space complying with 305 positioned for a forward approach shall be provided....
-
604.2 Location
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
604.5.2 Rear Wall
Where an administrative authority requires flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then the rear grab bar shall...
-
11B-405.7.5 Doorways
Doors, in any position, shall not reduce the minimum dimension of the ramp landing to less than 42 inches (1067 mm). [2010 ADAS] 405.7.5 Doorways. ...