[35.104 & 36.104] A facility in existence on any given date, without regard to whether the facility may also be considered newly constructed or altered under this part....
Search Results "Trail Facility"
-
Existing Facility
-
F201.4.1 Documentation and Notification When Exceptions Used for Trails and Beach Access Routes
Federal agencies shall document the basis for not fully complying with a specific provision in 1017 or 1018 on a portion of a trail or beach access route based on Exception 1 in 1017.1 or...
-
F206.1 General
Accessible routes shall not be required where outdoor recreation access routes are provided at camping facilities in accordance with F244.5, picnic facilities in accordance with F245.4,...
-
1017.9 Protruding Objects
This section requires constructed elements on trails, resting intervals, and passing spaces to comply with the technical requirements for protruding objects in 307 of the Architectural Barriers...
-
1017.8 Resting Intervals
requirements for the length (1017.8.1), width (1017.8.2), and slope (1017.8.3) of resting intervals; and for a turning space (1017.8.4) where resting intervals are provided adjacent to a trail...
-
7.4.1 Surface
The trail tread surface, including resting intervals and passing spaces, shall be both firm and stable....
-
1017.7.2 Cross Slope
This section requires the cross slope of trails to not be steeper than 1:48....
-
1017.8 Resting Intervals
Resting intervals shall comply with 1017.8.
-
1017.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
1017.8 Resting Intervals
Resting intervals shall comply with 1017.8.
-
1017.8.1 Length
This section requires resting intervals to be 60 inches long minimum.
-
1017.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
Commercial Facilities
[36.104] Facilities – (1) Whose operations will affect commerce; (2) That are intended for nonresidential use by a private entity; and (3) That are not – (i) Facilities that...
- Access Northern California
-
Passing Spaces [1017.4]
Where the trail is heavily used or the trail is not at the same level as the adjoining ground surface, such as a bridge crossing a ravine, increasing the frequency of passing spaces or widening...
-
Constructed Features
Constructed Features are commonly found along trails or as part of trails....
-
Rehabilitation Facilities and Outpatient Physical Therapy Facilities: ADA Standard Section 208.2.2
Section 208.2.2 covers scoping requirements in the current ADA Standards for accessible parking at rehabilitation and outpatient physical therapy facilities.
-
1017.2 Surface
This section requires the surface of trails, passing spaces, and resting intervals to be firm and stable. A firm trail surface resists deformation by indentations....
-
Clear Tread Width [1017.3]
The clear tread width of trails must be a minimum of 36 inches (figure 2)....
-
Camping and Picnic Facilities and Viewing Areas on Trails [F247.4]
When camping and picnic facilities or viewing areas are constructed or altered along a trail, they must comply with the applicable scoping and technical requirements for the facility, regardless...
- Wetland Trail Design and Construction
-
11B-201.2 Application based on building or facility use
Where a site, building, facility, room, or space contains more than one use, each portion shall comply with the applicable requirements for that use....
-
11B-201.2 Application based on building or facility use
Where a site, building, facility, room, or space contains more than one use, each portion shall comply with the applicable requirements for that use....
-
1017.7.1 Maximum Running Slope and Segment Length
Not more than 30 percent of the total length of a trail shall have a running slope steeper than 1:12 (8.33%)....