The clear pier space shall be permitted to be 36 inches (915 mm) wide minimum for a length of 24 inches (610 mm) maximum provided that multiple 36 inch (915 mm) wide segments are separated...
Search Results "Segment Length"
-
Boarding Pier Clearances: ADA Standard Section 1003.3.2
-
1016.8.1 Length
This section requires resting intervals to be 60 inches long minimum.
-
1017.8.1 Length
This section requires resting intervals to be 60 inches long minimum.
-
11B-1003.3.2 Boarding pier clearances
Exceptions: The clear pier space shall be permitted to be 36 inches (914 mm) wide minimum for a length of 24 inches (610 mm) maximum provided that multiple 36 inch (914 mm) wide segments...
-
11B-1003.3.2 Boarding pier clearances
Exceptions: The clear pier space shall be permitted to be 36 inches (914 mm) wide minimum for a length of 24 inches (610 mm) maximum provided that multiple 36 inch (914 mm) wide segments...
-
Running Slope [1018.7.1]
When the running slope of a segment of beach access route is steeper than 1:20 (5 percent), the maximum length of the segment is specified in table 6, and a resting interval must be provided...
-
Ground Level: ADA Standard Section 1008.2.4.1
shall be permitted to be 44 inches (1120 mm) minimum, if at least one turning space complying with 304.3 is provided where the restricted accessible route exceeds 30 feet (9145 mm) in length...
-
11B-1008.2.4.1 Ground level
permitted to be 44 inches (1118 mm) minimum, if at least one turning space complying with Section 11B-304.3 is provided where the restricted accessible route exceeds 30 feet (9144 mm) in length...
-
11B-1008.2.4.1 Ground level
permitted to be 44 inches (1118 mm) minimum, if at least one turning space complying with Section 11B-304.3 is provided where the restricted accessible route exceeds 30 feet (9144 mm) in length...
-
Side Entry Openings, and Width and Length of Wheelchair Space
Side Entry Openings, and Width and Length of Wheelchair Space If the wheelchair space can only be entered from the side, the ride must be designed to permit sufficient turning space for...
-
5.4.2.2 Transfer and Positioning Support Length for Imaging Equipment with Transfer Surfaces
5.4.2.2 Transfer and Positioning Support Length for Imaging Equipment with Transfer Surfaces....
-
Running Slope [1017.7.1]
Trails or trail segments of any length may be constructed with running slopes up to 1:20 (5 percent)....
-
7.4.3.1 Running Slope (Grade)
No more than 30 percent of the total trail length may exceed a running slope (grade) of 1:12 (8.33 percent)....
-
Running Slope [1016.7.1]
ORAR sections of any length may be constructed with a running slope up to 1:20 (5 percent)....
-
SCOTT JOHNSON v. STARBUCKS CORPORATION - AMICUS BRIEF
DAVID L. ANDERSON (CABN 149604) United States Attorney SARA WINSLOW (DCBN 457643) Chief, Civil Division ELLEN LONDON (NYRN 4605671) Assistant United States Attorney 450...
-
Trail Grade
The ascent or descent of a trail segment expressed as a percentage of its length. When expressed as a ratio of rise to length to the term used is running slope....
-
704.2.4 Cord Length
The cord from the telephone to the handset shall be 29 inches (735 mm) long minimum.
-
704.2.4 Cord Length
The cord from the telephone to the handset shall be 29 inches (735 mm) long minimum.
-
4.31.8 Cord Length
The cord from the telephone to the handset shall be at least 29 in (735 mm) long.
-
4.31.8 CORD LENGTH
The cord from the telephone to the handset shall be at least 29 in (735 mm) long.
-
5.4.2.2 Transfer and Positioning Support Length Recommendations for Imaging Equipment with Transfer Surfaces
5.4.2.2 Transfer and Positioning Support Length Recommendations for Imaging Equipment with Transfer Surfaces On imaging equipment with transfer surfaces, the transfer surface is oriented...
-
Trail Slopes
Trails or trail segments of any length may be constructed with a running slope ratio of up to 1:20 (a 5-percent grade)....
-
1017.7 Slopes
This section contains technical requirements for the maximum running slope and segment length (1017.7.1) and cross slope (1017.7.2) of trails....