The standards do not require a minimum horizontal separation between changes in level of a ½” or less....
Search Results "Minimum Dimension"
Filters
Commonly Searched Documents
-
Is there a minimum distance between changes in level?
-
211.3 More Than Minimum Number
211.3 More Than Minimum Number....
-
Revised Knee Clearance Depth and Footrest Clearance dimensions for sizing of mammography equipment
Access Board RE: Revised Knee Clearance Depth and Footrest Clearance dimensions for sizing of mammography equipment...
-
3.3.7 Toe Clearance Height, minimum
3.3.7 Toe Clearance Height, minimum There is relatively large disparity between the standards for toe clearance height, with the U.S. having the lowest (230 mm or 9 in.), followed by...
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
Accessible Entrances: Minimum Number [§206.4]
Accessible Entrances: Minimum Number [§206.4] At least 60% of public entrances must be accessible in new construction, in addition to entrances directly serving tenancies, parking...
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
Non-Circular Cross Section: ADA Standard Section 609.2.2
Section 609.2.2 covers the current ADA Standards for non-circular grab bar cross sections.
-
11B-609.2.2 Non-circular cross section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (102 mm) minimum and 4.8 inches (122 mm)...
-
233.3.1 Minimum Number: New Construction
233.3.1 Minimum Number: New Construction. Newly constructed facilities with residential dwelling units shall comply with 233.3.1....
-
Non-Circular Cross Sections: ADA Standard Section 505.7.2
Section 505.7.2 covers the current ADA Standards for the non-circular cross section of handrail gripping surfaces.
-
11B-505.7.2 Non-circular cross sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (102 mm) minimum and 6¼ inches (159 mm) maximum, and a cross-section dimension of...
-
810.2.2 Dimensions--Modification to 810.2.2 of Appendix D to 36 CFR Part 1191
810.2.2 Dimensions--Modification to 810.2.2 of Appendix D to 36 CFR Part 1191 Bus boarding and alighting areas shall provide a clear length of 96 inches (2440 mm), measured perpendicular...
-
211.3 More Than Minimum Number
Where more than the minimum number of drinking fountains specified in 211.2 are provided, 50 percent of the total number of drinking fountains provided shall comply with 602.1 through 602.6...
-
F211.3 More Than Minimum Number
Where more than the minimum number of drinking fountains specified in F211.2 are provided, 50 percent of the total number of drinking fountains provided shall comply with 602.1 through 602.6...
-
Brady Worldwide Penalty $250 1st Offense Subsequent Offenses $250 Minimum Parking Sign
PENALTY $250 1ST OFFENSE SUBSEQUENT OFFENSES $250 MIN AND/OR UP TO 90 DAYS COMMUMITY SERVICE Sign Part Number: 103713 Size: 12" H x 10" W Material Description: Reflective...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Scooter
The accompanying table provides dimensions values for clear floor area to accommodate 95% of scooter (n=30), power chair (n=189), and manual chair (n=276) users that were measured as part...
-
(1) Adjustability: Minimum High Transfer Height
While 20 commenters responded to question 14, only four commenters explicitly addressed the proposed minimum high height of 25 inches....
-
11B-409.4.6.1 Size
Control buttons shall be ¾ inch (19.1 mm) minimum in their smallest dimension....
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
Size: ADA Standard Section 407.4.6.2.1
Section 407.4.6.2.1 covers the current ADA Standards for the size of the elevator car control buttons.
-
3.3.9 Toe Clearance Depth, minimum
3.3.9 Toe Clearance Depth, minimum Toe clearance depths for the standards range from 150 mm (6 in.) in the U.S. to 230 mm (9 in.) in Canada (Figure 3‒9)....
-
Size: ADA Standard Section 409.4.6.1
Section 409.4.6.1 covers the current ADA Standards for the size of the car controls in private residence elevators.
-
Call Buttons: ADA Standard Section 409.2
Section 409.2 covers the current ADA Standards for call buttons in private residence elevators.
