Section 38.23(d) of the DOT ADA regulations requires all ADA-compliant buses and vans to have a two-part securement system, one to secure the wheelchair, and a seat belt and...
Search Results "Commuter Bus Service"
Commonly Searched Documents
-
What kinds of securement equipment must be provided in buses and vans?
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Under the broad nondiscrimination provisions in Section 37.5 of the DOT ADA regulations, a transit operator is not permitted to mandate the use by wheelchair users of seat...
-
What kinds of securement equipment must be provided in buses and vans?
Section 38.23(d) of the DOT ADA regulations requires all ADA-compliant buses and vans to have a two-part securement system, one to secure the wheelchair, and a seat belt and shoulder...
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Under the broad nondiscrimination provisions in Section 37.5 of the DOT ADA regulations, a transit operator is not permitted to mandate the use by wheelchair users of seat belts and...
-
DEFINITION: SERVICE ANIMAL
A “service animal” is now defined as any dog* individually trained to do work or perform tasks benefitting [sic] an individual with a disability, including a physical, sensory, psychiatric...
- Service and Companion Animal Owners: Know Your Rights!
-
12145(a)(1)
(1) that the initial solicitation for new buses made by the public entity specified that all new buses were to be lift-equipped and were to be otherwise accessible to and usable by...
-
10.2.1 New Construction
[See subsections ...]
-
If a passenger loading area serves cars and vans, as well as buses, must the provisions for passenger loading zones and bus loading zones both be satisfied?
No, provisions for bus loading zones (§810.2) apply only to on-street bus stops and those bus loading zones that exclusively serve designated or specified public transportation vehicles....
-
§ 38.101(a)
(a) Any stepwell or doorway with a lift, ramp or bridge plate shall have, when the door is open, at least 2 footcandles of illumination measured on the step tread, ramp, bridge...
-
§ 38.101(b)
(b) The doorways of cars not operating at lighted station platforms shall have outside lights which, when the door is open, provide at least 1 footcandle of illumination on the...
-
§ 38.97(c)
(c) At entrances equipped with steps, handrails or stanchions shall be provided in the entrance to the car in a configuration which allows passengers to grasp such assists from...
-
§ 38.95(b)(9) Platform deflection
(9) Platform deflection. The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll) in any direction between its unloaded...
-
§ 38.95(b) Car lift
(b) Car Lift—
-
§ 38.107 Restrooms
[See subsections ...]
-
§ 38.95(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
§ 38.101 Lighting
[See subsections ...]
-
§ 38.97 Interior circulation, handrails and stanchions
[See subsections ...]
-
§ 38.95(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
10.1 General
Every station, bus stop, bus stop pad, terminal, building or other transportation facility, shall comply with the applicable provisions of 4.1 through 4.35, sections 5 through 9, and the...
-
49 CFR Part 38 - ADA Accessibility Specifications for Transportation Vehicles (with amendments issued through 2014)
Authority: 42 U.S.C. 12101-12213; 49 U.S.C. 322. Source: 56 FR 45756, Sept. 6, 1991, unless otherwise noted.
-
11B-810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....
-
810.2.1 Surface
Bus stop boarding and alighting areas shall have a firm, stable surface....