Section 410.6 covers the current ADA Standards for the doors and gates of platform lifts.
Search Results "Clear Width at Turn"
Filters
Commonly Searched Documents
-
Doors and Gates: ADA Standard Section 410.6
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge 1260
Five Knuckle - Full Mortise Swing Clear Hinge 1260 - Plain Bearing - Standard Weight Description: - ANSI A8123 - For square edge doors - Non-rising removable pin with...
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
3. Sidewalk Width
3. ...is the usable width of sidewalks at least 36" wide to accommodate wheelchair travel, even if cars project over the curb onto the sidewalk?...
-
11B-406.5.3 Landings
The landing clear length shall be 48 inches (1219 mm) minimum....
-
Visitability
— The three essential features are one entrance with zero steps; 32 inches or more of clear passage space through interior doors, including bathrooms; and at least a half bathroom on...
-
Seat Width: ADA Standard Section 1009.2.5
The seat shall be 16 inches (405 mm) wide minimum.
-
Stanley FBB 248 Standard Weight Ball Bearing “Swing Clear” Full Mortise Offset Door Hinge
FBB248 and STSFBB248 for full mortise application on square edge doors Specify FBB258 and STSFBB258 for full mortise application on bevel edge doors Designed to swing doors completely clear...
-
Can clear floor/ground space or turning space overlap other space requirements?
Yes, clear floor or ground spaces and turning space can overlap other required clearances, including other clear floor spaces, door maneuvering clearances, and fixture clearances....
-
Accessible Routes Throughout the Museum
and a stanchion, passage must be maintained at a minimum of 36 inches wide, measured from inside edge to inside edge of the stanchion bases or floor moldings, except at doors where the width...
-
Common Questions (Clear Floor or Ground Space and Turning Space)
Common Questions
-
Size: ADA Standard Section 304.3
Section 304.3 covers the current ADA Standards for the required size of turning space.
-
3.4.4 Clear Ground Space and Turning Space
Each viewing area that is required to be accessible by section 3.4.1 shall have a clear ground or floor space 36 inches (915 mm) minimum by 48 inches (1220 mm) minimum positioned for either...
-
11B-304.3 Size
Turning space shall comply with Section 11B-304.3.1 or 11B-304.3.2....
-
Clear Floor Space: ADA Standard Section 611.2
Section 611.2 covers the current ADA Standards for the clear floor space at washing machines and clothes dryers.
-
Clear Floor or Ground Space: ADA Standard Section 305
Section 305 covers the current ADA Standards for clear floor or ground space.
-
11B-403.5.1 Clear width
The clear width for sidewalks and walks shall be 48 inches (1219 mm) minimum....
-
11B-403.5.1 Clear width
The clear width for sidewalks and walks shall be 48 inches (1219 mm) minimum....
-
11B-403.5.1 Clear width
The clear width for sidewalks and walks shall be 48 inches (1219 mm) minimum....
-
Figure 304.3.2 T-Shaped Turning Space – Drawing from the U.S. Access Board
-
Clear Tread Width and Passing Spaces for Outdoor Recreation Access Routes
Clear tread width means the width of the traveled surface on the ground and also above the ground between obstacles (figure 40)....
-
Appropriate clear floor space
Appropriate clear floor space (shown by dashed lines) is needed adjacent to each cell feature (see page 1 diagrams on clear floor space)....
-
Width: ADA Standard Section 502.3.1
Section 502.3.1 covers the current ADA Standards for the required width of access aisles.
-
Clear Floor Space: ADA Standard Section 410.3
Section 410.3 covers the current ADA Standards for clear floor space in platform lifts.
