The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch high; shall have a clear width of 30 inches; and shall accommodate...
Search Results "Boat Slip"
2010 ADA Definition
Boat Slip: That portion of a pier, main pier, finger pier, or float where a boat is moored for the purpose of berthing, embarking, or disembarking.
Filters
Commonly Searched Documents
-
ยง 38.23(c)(2) Ramp surface
-
11B-1003.3.2 Boarding pier clearances
Boarding piers at boat launch ramps shall provide clear pier space 60 inches (1524 mm) wide minimum and shall extend the full length of the boarding pier....
-
1003.3.2 Boarding Pier Clearances
Boarding piers at boat launch ramps shall provide clear pier space 60 inches (1525 mm) wide minimum and shall extend the full length of the boarding pier....
-
1003.3.2 Boarding Pier Clearances
Boarding piers at boat launch ramps shall provide clear pier space 60 inches (1525 mm) wide minimum and shall extend the full length of the boarding pier....
-
Wooster Products Spectra Safety Treads (WP3C)
SAFETY TREADS IN COLORS Designed to enhance the safety and beauty of every architectural installation. A high content of Aluminum oxide abrasive grit for long life lasting...
-
Wooster Products Supergrit Safety Treads (231BF)
Supergrit Treads Provide... A heat treated, corrosion resistant, extruded aluminum base with satin/lacquered finish. The use of diamond-hard aluminum oxide in the filler assures...
-
American Safety Tread Co., Inc. Cast Metal Safety Stair Nosing Style 801
Longest Wearing: American Safety Tread stair nosings and structural treads ensure anti-slip protection for pedestrians....
-
American Safety Tread Co., Inc. Type T-24H Contrasting Stripe
Impact Resistant: These nosings are manufactured from an extruded aluminum base filled with a mixture of anti-slip abrasive granules in an advanced formula epoxy binder....
-
American Safety Tread Co., Inc. Type T-24 Contrasting Stripe
Features: Type Number:ย ย ย ย ย T24 Description:ย ย ย ย ย ย ย ย ย Full Abrasive anti-slip safety strip for poured concrete stairs....
-
National Floor Safety Institute (NFSI)
Founded in 1997 the National Floor Safety Institute (NFSI) is a 501(c)(3) non-for-profit organization whose mission is: โto aid in the prevention of slips, trips, and falls through education...
-
Acceptable Trail Surfacing Requirements
Trail surfaces are currently considered accessible only if the surfacing material is firm, stable, and slip-resistant and the trail has the engineered attributes of adequate width, moderately...
-
M304.2 Standing Surface (Section-by-Section Analysis)
The MDE NPRM proposed to require that the standing surface on which patients stand be slip resistant....
-
M304.2 Standing Surface
The surface on which the patient stands shall be slip resistant....
-
American Safety Tread Co., Inc. E- Cast Metal Safety Stair Nosing Style 816
Surface Design: Cross Hatched Non-Slip cast metal stair nosing with #24 virgin grain Silicon Carbide abrasive granules embedded into the walking surface while the matrix is in a molten...
-
American Safety Tread Co., Inc. Stair Nosing Style 950
Surface Design: Cross Hatched Non-Slip cast metal stair nosing with #24 virgin grain Silicon Carbide abrasive granules embedded into the walking surface while the matrix is in a molten...
-
American Safety Tread Co., Inc. Stair Nosing Style 850
Surface Design: Cross Hatched Non-Slip cast metal stair nosing with #24 virgin grain Silicon Carbide abrasive granules embedded into the walking surface while the matrix is in a molten...
-
4.5.1* General
Ground and floor surfaces along accessible routes and in accessible rooms and spaces including floors, walks, ramps, stairs, and curb ramps, shall be stable, firm, slip-resistant, and shall...
-
4.5.1* GENERAL
Ground and floor surfaces along accessible routes and in accessible rooms and spaces, including floors, walks, ramps, stairs, and curb ramps, shall be stable, firm, slip-resistant, and shall...
-
ยง 38.159(c)(2) Ramp surface
The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch (6.5 mm) high; shall have a clear width of 30 inches (760 mm);...
-
Tile Tech Paversยฎ Oceanicโข Series - Wave-Paveโข
These versatile pavers can also be manufactured with various design mixes such as crushed seashells, granite chips and recycled glass which are then honed and shot blasted for a unique and slip...
-
Tile Tech Paversยฎ Coral-Paveโข
Slip Resistant: Due to the unique coral texture these pavers are extremely slip resistance making them ideal for use in all wet or dry outdoor areas, including pool surrounds....
-
ยง 38.159(b)(6) Platform surface
The platform surface shall be free of any protrusions of 1/4 inch (6.5 mm) high and shall be slip resistant....
-
Tile Tech Pavers IPE Deck Tiles
Requires the Premium User plan or above. (Login or upgrade your account!) -
Tile Tech Paversยฎ Porcelain Paversโข Series
to its technical and aesthetic properties, our porcelain pavers range can meet a number of important safety requirements for exterior floor coverings in public places, combining an anti-slip...
