Non-rail vehicles shall provide handrails, stanchions, and handholds in accordance with T207. Handrails, stanchions, and handholds shall comply with T303....
Search Results "Handhold"
-
T207.1 General
-
T207.4 Circulation Paths
Handrails, stanchions, and handholds shall be provided along circulation paths in accordance with T207.4....
-
T207.4.1. Small vehicles
Handrails, stanchions, or handholds shall be provided within small non-rail vehicles in a configuration that permits onboard circulation and assistance with seating and standing....
-
T207.4.2. Large vehicles
Handholds or stanchions shall be provided within large non-rail vehicles on all forward- and rear-facing seat backs located directly adjacent to the aisle....
-
T207 Handrails, Stanchions, and Handholds
-
T303 Handrails, Stanchions, and Handholds
-
T303.2 Edges
Edges shall be rounded or eased.
-
T303.3 Cross Section
Gripping surfaces shall have a cross section complying with T303.3.
-
T303.3.1 Seat-Back Handhold Cross Section
The cross section of seat-back handholds shall have an outside diameter of 7/8 inches (22 mm) minimum and 2 inches (50 mm) maximum....
-
T303.4 Clearance
Clearance between gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum.
-
D. Chapter 3: Building Blocks
Chapter 3 in the 2016 Non-Rail Vehicle Guidelines contains the technical requirements related to three areas—walking surfaces (T302), handrails, stanchions, and handholds (T303), and operable...
-
T206 Handrails, Stanchions, and Handholds
Large non-rail vehicles must generally provide stanchions or handholds on forward- and rear-facing seat backs....
-
T303 Handrails, Stanchions, and Handholds
We received only one comment on the proposed technical requirements in the 2010 NPRM related to the cross section of seat-back handholds....