This federally sponsored research reveals that in many cases, neither the bicycle nor the pedestrian is the design "vehicle" or user for shared use paths, their intersections with...
Search Results "Trail"
-
Design of Shared Use Paths, Street Intersections, and Midblock Crossings
-
1017 Trails
-
1017.1 General
Trails shall comply with 1017. EXCEPTIONS: 1. ...
-
1017.3 Clear Tread Width
The clear tread width of trails shall be 36 inches (915 mm) minimum....
-
1017.4 Passing Spaces
Where the full length of a trail does not fully comply with 1017, a passing space shall be located at the end of the trail segment that fully complies with 1017....
-
1017.4.1 Size
The intersection of two trails providing a T-shaped space complying with 304.3.2 where the base and the arms of the T-shaped space extend 48 inches (1220 mm) minimum beyond the intersection...
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
1017.7 Slopes
The slopes of trails shall comply with 1017.7....
-
1017.7.1 Maximum Running Slope and Segment Length
Not more than 30 percent of the total length of a trail shall have a running slope steeper than 1:12 (8.33%)....
-
1017.7.2 Cross Slope
The cross slope shall not be steeper than 1:48. EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when...
-
1017.8 Resting Intervals
Resting intervals shall comply with 1017.8.
-
1017.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
1017.8.2 Width
Where resting intervals are provided within the trail tread, resting intervals shall be at least as wide as the widest segment of the trail tread leading to the resting interval. ...
-
1017.8.3 Slope
Resting intervals shall have slopes not steeper than 1:48 in any direction. EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than...
-
1017.8.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with 304.3.2 shall be provided. ...
-
1017.9 Protruding Objects
Constructed elements on trails, passing spaces, and resting intervals shall comply with 307. Advisory 1017.9 Protruding Objects. ...
-
Trail Type
and/or seasons by trail or trail segment. 1....
-
Managed Use
There can be more than one Managed Use per trail or trail segment. 3....
-
Designed Use
Parameters or technical specifications will apply to a trail. 1....
-
Key Differences Between Routes
Pedestrian Trails—A trail typically is not parallel to a roadway and is designed primarily for recreational purposes....
-
Notification Forms
an exemption for the entire trail or beach access route (see 1017.1, exception 2 and 1018.1, exception 2)....
-
5.1.2 Level or Sloped Entry
If the camp shelter is located off a trail, the sloped entry is to comply with the FSTAG Trail provisions....
-
Where must the wheelchair symbol be posted?
to the standard message with the trail name, number, destination, and distance: Typical and maximum trail grade Minimum trail width Typical and maximum cross slope...
-
11B-246.7 Trails and paths
Trails, paths and nature walk areas, or portions of them, shall be constructed with gradients permitting at least partial use by wheelchair occupants....