At least 20 percent, but no less than one, of each type of outdoor constructed feature provided within each viewing area must comply with the applicable technical requirements for the feature...
Search Results "Viewing Scope"
Filters
Commonly Searched Documents
-
Outdoor Constructed Features Within Viewing Areas [F246.3]
-
1011.8 Viewing Scopes
This section requires eyepieces on viewing scopes to be 43 inches minimum and 51 inches maximum above the ground....
-
1011.8 Viewing Scopes
Eyepieces on viewing scopes shall be 43 inches (1090 mm) minimum and 51 inches (1295 mm) maximum above the ground....
-
1011.8 Viewing Scopes
Eyepieces on viewing scopes shall be 43 inches (1090 mm) minimum and 51 inches (1295 mm) maximum above the ground....
-
4.6.1 General
Where telescopes or periscopes are provided, no fewer than two telescopes or periscopes shall be provided at each distinct viewing location in a viewing area....
-
4.6 Telescopes and Periscopes
[See subsections ...]
-
3.4.1 General
Where viewing areas are provided, each shall comply with section 3.4. Exception 1....
-
Viewing Areas [F246.3]
Within viewing areas, at least 20 percent, but no less than one, of each type of outdoor constructed feature must comply with the applicable technical requirements for the feature....
-
Viewing Scopes [1011.2, 1011.3, and 1011.8]
Viewing areas or overlooks are sometimes equipped with viewing scopes to provide visitors with a closer view of a point of interest....
-
4.6.3 Eyepiece
The eyepiece for the telescope or periscope that is usable from a seated position for viewing each point of interest shall be positioned 43 inches (1090 mm) minimum and 51 inches (1295 mm...
-
F246.3 Outdoor Constructed Features
Where provided within viewing areas, at least 20 percent, but not less than one, of each type of outdoor constructed feature shall comply with 1011....
-
F246.3 Outdoor Constructed Features
Where provided within viewing areas, at least 20 percent, but not less than one, of each type of outdoor constructed feature shall comply with 1011....
-
F246.3 Outdoor Constructed Features
This section requires at least 20 percent, but not less than one, of each type of outdoor constructed feature provided within viewing areas to comply with the applicable technical requirements...
-
4.6.2 Operable Parts
Controls and operating mechanisms for telescopes and periscopes that are useable from a seated position shall comply with the operable parts requirements in sections 308 and 309.4 of...
-
F246.2 Distinct Viewing Locations
Each distinct viewing location within a viewing area shall comply with 1015. Advisory F246.2 Distinct Viewing Locations. ...
-
F246.2 Distinct Viewing Locations
This section requires each distinct viewing location within a viewing area to comply with the technical requirements for viewing areas in 1015....
-
F246.2 Distinct Viewing Locations
Each distinct viewing location within a viewing area shall comply with 1015. Advisory F246.2 Distinct Viewing Locations....
-
T402.1 General
Ramps and bridgeplates shall comply with T402. Ramps and bridgeplates shall be permitted to fold or telescope.
-
1015.3 Viewing Space
Each distinct viewing location shall provide a viewing space adjacent to the clear ground space required by 1015.2 through which the point of interest is viewable....
-
1015.3 Viewing Space
Each distinct viewing location shall provide a viewing space adjacent to the clear ground space required by 1015.2 through which the point of interest is viewable....
-
CHAPTER 2: SCOPING REQUIREMENTS
Chapter 2 discusses the scoping requirements for the most current ADA Standards.
-
DIVISION 2: SCOPING REQUIREMENTS
[See subsections ...]
-
Viewing Area
An outdoor space developed for viewing landscapes, wildlife, or other points of interest....
-
Viewing Area
An outdoor space developed for viewing landscapes, wildlife, or other points of interest....