Search Results "Standing Scale"
-
seca mBCA Ultra
-
Standing Supports (M304.3 and M305.3)
• Sub-Committee Recommendation: Standing Supports – Location • (scales serving both wheelchair and standing users)....
-
M304.2.2 Standing Supports
Standing supports shall be provided on two sides of the standing surface and shall comply with M305.3....
-
M304.3 Standing Supports
Standing supports shall be provided on each side of the standing surface and shall comply with M305.3....
-
Medical Diagnostic Equipment Accessibility Standards Sub-Committee Recommendations Weight Scales
designed for wheelchair use Both seated in a wheelchair (M303) and in a standing position (M304) Standing supports Weight scales designed for both patients using wheelchairs...
-
M304.2.2 Standing Supports (Section-by-Section Analysis)
The MDE NPRM proposed requiring standing supports on each side of the standing surface of diagnostic equipment used by patients in the standing position, and compliance with the technical...
-
ii. Accessible scales
Scales should be accessible to individuals who use wheelchairs or have other mobility disabilities that would impede the use of step-on scales....
-
5.9 Standing Support for Equipment Used by Patients in a Standing Position
5.9 Standing Support for Equipment Used by Patients in a Standing Position....
-
M305.3 Standing Supports
Standing supports shall provide continuous support throughout use of the diagnostic equipment and shall comply with M305.3....
-
M305.3 Standing Supports
Standing supports shall provide continuous support throughout use of the diagnostic equipment and shall comply with M305.3....
-
5.9 Standing Support Recommendations for M304 Diagnostic Equipment Used by Patients in a Standing Position
5.9 Standing Support Recommendations for M304 Diagnostic Equipment Used by Patients in a Standing Position Description: Many people who ambulate with a disability need support to maintain...
-
M305.3 Standing Supports (Section-by-Section Analysis)
All three concurred with adding cross section dimension requirements to standing supports....
-
M304.2 Standing Surface
The surface on which the patient stands shall be slip resistant....
-
M304.2 Standing Surface
Equipment surfaces on which patients stand must comply with M304.2...
-
M304 Diagnostic Equipment Used by Patients in Standing Position
M304 provides technical criteria for diagnostic equipment used by patients in a standing position such as a weight scale and X-ray equipment that is used in a standing position for certain...
-
M304.2 Standing Surface (Section-by-Section Analysis)
The MDE NPRM proposed to require that the standing surface on which patients stand be slip resistant....
-
Lines of Sight Over Standing Spectators: ADA Standard Section 802.2.2
Where spectators are expected to stand during events, spectators in wheelchair spaces shall be afforded lines of sight complying with 802.2.2....
-
M305.3.2.1 Horizontal Position
The height of the top of the gripping surface on horizontal standing supports shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface....
-
M305.3.3 Fittings
Standing supports shall not rotate within their fittings....
-
M305.3.3 Fittings
Standing supports shall not rotate within their fittings....
-
2. Standing Supports
maximum above the standing surface (proposed M305.3.1)....
-
M305.3.1.1 Horizontal Position
The length of gripping surfaces on horizontal standing supports shall be 4 inches (100 mm) minimum except for diagnostic equipment containing a wheelchair space which shall comply with M305.3.1.2...
-
M305.3.3 Fittings (Section-by-Section Analysis)
The MDE NPRM proposed to prohibit standing supports from rotating in their fittings. There were no comments on this section and it was not addressed by the MDE Advisory Committee....
-
M305.3.2.2 Vertical Position
The height of the lowest end of the gripping surface on vertical standing supports shall be 34 inches (865 mm) minimum and 37 inches (940 mm) maximum above the standing surface....
