The use of General Exception 2 is reasonable where one or more conditions for an exemption in section 7.1 and at least one of the following limiting factors exist: Limiting Factor...
Search Results "Resting Interval"
-
7.2.2.1 Determining Impracticability
-
7.4.1 Surface
The trail tread surface, including resting intervals and passing spaces, shall be both firm and stable....
-
7.4.3.1 Running Slope (Grade)
Where the running slope (grade) of a segment of a trail is steeper than 1:20 (5 percent), the maximum length of the segment shall be in accordance with Table 7.4.3.1, and a resting interval...
-
7.4.4 Resting Intervals
Resting intervals shall comply with 7.4.4. Where the trail grade exceeds 1:20 (5 percent), resting intervals shall be provided as specified in Table 7.4.3.1....
-
7.4.4.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum....
-
7.4.4.2 Width
Where resting intervals are provided within the trail tread, resting intervals shall be at least as wide as the widest segment of the trail tread leading to the resting interval. ...
-
7.4.4.3 Slope
The slope of a resting interval shall not exceed 1:20 (5 percent) in any direction....
-
7.4.4.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with ABAAS section 304.3.2 shall be provided. ...
-
7.4.5 Passing Spaces
Trails with a clear tread width less than 60 inches (1525 mm) shall provide passing spaces complying with 7.4.5 at intervals of 1000 feet (300 m) maximum. ...
-
7.4.7 Openings
Openings in trail tread surfaces, trail resting spaces, and trail passing spaces shall be small enough to prevent passage of a 1/2 inch- (13 mm-) diameter sphere....
-
2.4.1.2
Resting intervals complying with section 2.3 shall be provided at distances of no more than 50 feet (15 m) apart. ...
-
2.4.1.3
Resting intervals complying with section 2.3 shall be provided at distances of no more than 30 feet (9 m) apart. ...
-
2.5 Resting Intervals
Resting intervals shall comply with 2.5....
-
2.5.1 Location
A resting interval shall be provided between each ORAR segment, in compliance with section 2.4.1....
-
2.5.2 Length
The resting interval length shall be 60 inches (1525 mm) long minimum....
-
2.5.3 Width
Where resting intervals are provided within an outdoor recreation access route, resting intervals shall be at least as wide as the widest segment of the outdoor recreation access route leading...
-
2.5.4 Slope
Resting intervals shall not be steeper than 1:33 (3 percent) in any direction....
-
2.5.5 Turning Space
Where resting intervals are provided adjacent to an outdoor recreation access route, a turning space complying with ABAAS section 304.3.2 shall be provided....
-
2.6 Passing Spaces
ORARs with a clear width less than 60 inches (1525 mm) shall provide passing spaces complying with 2.6 at intervals of 200 feet (61 m) maximum....
-
1016.2 Surface
This section requires the surface of outdoor recreation access routes, passing spaces, and resting intervals to be firm and stable....
-
1016.4 Passing Spaces
This section requires passing spaces to be provided at intervals of 200 feet maximum where the clear width of outdoor recreation access routes is less than 60 inches....
-
1016.5 Obstacles
This section contains technical requirements for obstacles on outdoor recreation access routes, passing spaces, and resting intervals....
-
1016.6 Openings
This section requires openings in the surface of outdoor recreation access routes, passing spaces, and resting intervals such as spaces between the boards in a boardwalk and drainage grates...
-
1016.7.1 Maximum Running Slope and Segment Length
Where the running slope of a segment of an outdoor recreation access route is steeper than 1:20 (5%), the maximum length of the segment is specified in Table 1016.7.1, and a resting interval...