Section 405.7 covers the current ADA Standards for ramp landings.
Search Results "Ramp Landing"
Filters
Commonly Searched Documents
-
Landings: ADA Standard Section 405.7
-
11B-405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with Section 11B-405.7. Advisory 11B-405.7 Landings....
-
Width: ADA Standard Section 405.7.2
Section 405.7.2 covers the current ADA Standards for the required width of ramp landings.
-
Length: ADA Standard Section 405.7.3
Section 405.7.3 covers the current ADA Standards for the required length of ramp landings.
-
Landings: ADA Standard Section 406.4
Section 406.4 covers the current ADA Standards for curb ramp landings.
-
Wet Conditions: ADA Standard Section 405.10
Section 405.10 covers the current ADA Standards for wet conditions at ramp landings.
-
11B-405.7.2.1
Top landings shall be 60 inches (1524 mm) wide minimum. Advisory 11B-405.7.2.1 Top landing width....
-
Extended Floor or Ground Surface: ADA Standard Section 405.9.1
Section 405.9.1 covers the current ADA Standards for extended floor or ground surface of the ramp run or landing.
-
11B-405.7.3.1
Bottom landings shall extend 72 inches (1829 mm) minimum in the direction of ramp run....
-
Change in Direction: ADA Standard Section 405.7.4
Section 405.7.4 covers the current ADA Standards for the change in direction at ramp landings.
-
11B-405.7.2 Width
The landing clear width shall be at least as wide as the widest ramp run leading to the landing....
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum....
-
11B-406.5.3 Landings
Landings shall be provided at the tops of curb ramps and blended transitions. The landing clear length shall be 48 inches (1219 mm) minimum....
-
Slope: ADA Standard Section 405.7.1
Section 405.7.1 covers the current ADA Standards for the slope in ramp landings.
-
Doorways: ADA Standard Section 405.7.5
Section 405.7.5 covers the current ADA Standards for doorway maneuvering clearance at ramp landings.
-
11B-405.9 Edge protection
Edge protection complying with Section 11B-405.9.2 shall be provided on each side of ramp runs and at each side of ramp landings. [2010 ADA Standards] 405.9 Edge Protection....
-
Edge Protection: ADA Standard Section 405.9
Section 405.9 covers the current ADA Standards for edge protection at ramps.
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
A4.8.4 Landings
Level landings are essential toward maintaining an aggregate slope that complies with these guidelines....
-
R407.6 Landings
R407.6 Landings. Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with R407.6....
-
6c. Ramp Landing
Does the ramp have a level landing at the top and bottom of each ramp section that is at least 60 inches long?...
-
Can handrails overlap ramp landings?
Along runs and landings, the minimum clear width must be measured between the leading edge of handrails....
-
Landings
Landings Landings are the level surfaces at the top and bottom of each ramp run....
-
11B-405.10 Wet conditions
Landings subject to wet conditions shall be designed to prevent the accumulation of water....