Support rails shall be provided on at least one wall of the car. Advisory 11B-407.4.10 Support rail....
Search Results "Support Rail"
-
11B-407.4.10 Support rail
-
11B-411.4.10 Support rail
Support rails complying with Section 11B-407.4.10 shall be provided on at least one wall of the car....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
11B-407.4.10.2 Surfaces
Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements....
-
11B-903.4 Back support
Back support shall be 2½ inches (64 mm) maximum from the rear edge of the seat measured horizontally. [2010 ADA Standards] 903.4 Back Support....
-
11B-810.5 Rail Platforms
Rail platforms shall comply with Section 11B-810.5....
-
11B-1008.4.5 Transfer supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
11B-1008.3.2.3 Transfer supports
At least one means of support for transferring shall be provided. Advisory 11B-1008.3.2.3 Transfer supports....
-
11B-218.2 New and altered fixed guideway stations
New and altered stations in rapid rail, light rail, commuter rail, intercity rail, high speed rail, and other fixed guideway systems shall comply with Sections 11B-810.5 through 11B-810.10...
-
11B-1008.3.1.4 Transfer supports
At least one means of support for transferring shall be provided....
-
11B-1005.2 Railings
Where provided, railings, guards, or handrails shall comply with Section 11B-1005.2....
-
11B-218.3 Key stations and existing intercity rail stations
Key stations and existing intercity rail stations shall comply with Sections 11B-810.5 through 11B-810.10....
-
11B-206.4.4.3 Key stations and intercity rail stations
Key stations and existing intercity rail stations required by Subpart C of 49 CFR part 37 to be altered, shall have entrances complying with Section 11B-404....
-
11B-810.6 Rail station signs
Rail station signs shall comply with Section 11B-810.6....
-
5. Transportation Vehicles
The Access Board issued an advance notice for public commend on an update of guidelines for rail cars on February 14, 2020. ...
-
11B-307.4.1 Guy braces
Where a guy support is used within either the width of a circulation path or 24 inches maximum outside of a circulation path, a vertical guy brace, sidewalk guy or similar device shall be...
-
11B-810.5.3 Platform and vehicle floor coordination
, commuter rail, or intercity rail systems: [ADA Title II - Public Transportation] 810.5.3 Platform and Vehicle Floor Coordination....
-
11B-201.4 Construction Support Facilities
support facilities it serves by an accessible route....
-
11B-810.5.1 Slope
Rail platforms shall not exceed a slope of 1:48 in all directions....
-
11B-206.4.4.2 Direct connections
Exception: In key stations and existing intercity rail stations, existing direct connections shall not be required to comply with Section 11B-404....
-
11B-810.5.2 Detectable warnings
Platform boarding edges not protected by platform screens or guards shall have detectable warnings complying with Section 11B-705 along the full length of the public use area of the...
-
11B-810.6.3 Station names
Stations covered by this section shall have identification signs complying with Section 11B-703.5. Signs shall be clearly visible and within the sight lines of standing and sitting...
-
11B-307.4 Vertical clearance
Vertical clearance shall be 80 inches (2032 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2032 mm) high. The...