[2010 ADA Standards] 105.2 Referenced Standards. The specific edition of the standards listed below are referenced in this document....
Search Results "Qualification Standard"
-
[2010 ADA Standards] 105.2 Referenced Standards
-
[ADA Title III §36.104] 1991 Standards
[ADA Title III §36.104] 1991 Standards means requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this...
-
[ADA Title II §35.104] 1991 Standards
[ADA Title II §35.104] 1991 Standards means the requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to...
-
CHAPTER 35 REFERENCED STANDARDS
The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title, and the section or sections of this document that reference...
-
[2010 ADA Standards] 105.1 General
[2010 ADA Standards] 105.1 General....
-
11B-105 Referenced standards
[See subsections ...]
-
[ADA Title II §35.104] 2010 Standards
[ADA Title II §35.104] 2010 Standards means the 2010 ADA Standards for Accessible Design, which consist of the 2004 ADAAG and the requirements contained in §35.151....
-
[ADA Title III §36.104] 2010 Standards
[ADA Title III §36.104] 2010 Standards means the 2010 ADA Standards for Accessible Design, which consist of the 2004 ADAAG and the requirements contained in subpart D of this part....
-
11B-106.2 Terms defined in referenced standards
Terms not listed in Section 11B-106.5 and not defined in Chapter 2, Section 202, but specifically defined in a referenced standard, shall have the specified meaning from the referenced standard...
-
11B-105.1 General
See Chapter 35.
-
ANSI
[DSA-AC] The American National Standards Institute....
-
11B-411.2.1.2.1 Keypads
Keypads shall be in a 12-key ascending telephone keypad layout. Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised...
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-707.6.2 Numeric keys
Numeric keys shall be arranged in a 12-key ascending or descending telephone keypad layout. The number five key shall be tactilely distinct from the other keys. Advisory...
-
Upcoming Revisions to the ADA Standards
Although these topics are out of the scope of this Guide, the following additions and updates to the ADA standards are worth watching for....
-
11B-812.6.2 Standard accessible
Vehicle spaces serving standard accessible EVCS shall be 108 inches (2743 mm) wide minimum and shall have an adjacent access aisle complying with Section 11B-812.7....
-
11B-608.5.2 Standard roll-in type shower compartments
In standard roll-in type shower compartments, the controls, faucets, and the shower spray unit shall be located on the back wall of the compartment adjacent to the seat 16 inches (406 mm...
-
4. Information and Communication Technology (ICT) Standards and Guidelines
The Section 508 Standards apply to electronic and information technology procured by the federal government, including computer hardware and software, websites, multimedia such as video,...
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
11B-608.3.2 Standard roll-in type shower compartments
[2010 ADA Standards] 608.3.2 Standard Roll-In Type Shower Compartments....
-
SECTION 1.2 BUILDING STANDARDS COMMISSION
[See subsections ...]
-
2022 California Standards for Accessible Design Guide
Including selected excerpts from the Americans with Disabilities Act and Safe Harbor criteria Effective January 1, 2023 Version 1.0 COMPILED and © 2023 by EVAN TERRY...
-
PATH OF TRAVEL
ETA Editor's Note CBC Chapter 11B does not apply the same qualification as ADA for imposing the responsibility to make the path of travel to an addition or alteration accessible, implying...
-
11B-202.3.1 Prohibited reduction in access
If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the number...