Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (12.7 mm) under rated loading to...
Search Results "Loading Condition"
-
11B-407.4.4 Leveling
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
-
11B-405.10 Wet conditions
Landings subject to wet conditions shall be designed to prevent the accumulation of water....
-
11B-504.7 Wet conditions
Stair treads and landings subject to wet conditions shall be designed to prevent the accumulation of water....
-
11B-406.5.5 Wet conditions
Curb ramps and blended transitions shall comply with Section 11B-405.10.
-
OCCUPANT LOAD
The number of persons for which the means of egress of a building or portion thereof is designed.
-
11B-209.2.1 Passenger drop-off and loading zones
Passenger drop-off and loading zones, except those required to comply with Sections 11B-209.2.2 and 11B-209.2.3, shall provide at least one passenger drop-off and loading zone complying...
-
11B-503 Passenger drop-off and loading zones
[2010 ADA Standards] 503 Passenger Loading Zones...
-
11B-234.2 Load and unload areas
Load and unload areas serving amusement rides shall comply with Section 11B-1002.3....
-
11B-206.2.9.1 Load and unload areas
Load and unload areas shall be on an accessible route....
-
11B-234.4.1 Load and unload areas
Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with Section 11B-1002.3....
-
11B-1002.3 Load and unload areas
A turning space complying with Sections 11B-304.2 and 11B-304.3 shall be provided in load and unload areas....
-
11B-209 Passenger drop-off and loading zones and bus stops
209 Passenger Loading Zones and Bus Stops ETA Editor’s Note The CBC includes passenger drop-off. Therefore, the CBC is more inclusive....
-
11B-209.2 Type
Where provided, passenger drop-off and loading zones shall comply with Section 11B-209.2. [2010 ADA Standards] 209.2 Type....
-
11B-209.1 General
Passenger drop-off and loading zones shall be provided in accordance with Section 11B-209. [2010 ADA Standards] 209.1 General....
-
11B-503.1 General
Passenger drop-off and loading zones shall comply with Section 11B-503....
-
11B-209.4 Valet parking
Parking facilities that provide valet parking services shall provide at least one passenger drop-off and loading zone complying with Section 11B-503....
-
11B-209.2.2 Bus loading zones
In bus loading zones restricted to use by designated or specified public transportation vehicles, each bus bay, bus stop, or other area designated for lift or ramp deployment shall comply...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
1018.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall be not less than that required for corridors by...
-
1018.5 Aisles in other than assembly spaces and Groups B and M
In other than rooms or spaces used for assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load served...
-
11B-209.5 Mechanical access parking garages
Mechanical access parking garages shall provide at least one passenger drop-off and loading zone complying with Section 11B-503 at vehicle drop-off and vehicle pick-up areas....
-
11B-503.2 Vehicle pull-up space
Passenger drop-off and loading zones shall provide a vehicular pull-up space 96 inches (2438 mm) wide minimum and 20 feet (6096 mm) long minimum....