Counter slopes of adjoining gutters and road surfaces immediately adjacent to and within 24 inches (610 mm) of the curb ramp shall not be steeper than 1:20....
Search Results "Counter Slope"
Commonly Searched Documents
-
11B-406.5.8 Counter slope
-
11B-227.3 Counters
Where provided, at least one of each type of sales counter and service counter shall comply with Section 11B-904.4....
-
11B-904.4 Sales and service counters
Sales counters and service counters shall comply with Section 11B-904.4.1 or 11B-904.4.2....
-
11B-810.5.1 Slope
Rail platforms shall not exceed a slope of 1:48 in all directions....
-
11B-405.3 Cross slope
Cross slope of ramp runs shall not be steeper than 1:48. Advisory 11B-405.3 Cross slope. Cross slope is the slope of the surface perpendicular to the direction of travel....
-
11B-904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
11B-904.2 Approach
All portions of counters required to comply with Section 11B-904 shall be located adjacent to a walking surface complying with Section 11B-403. Advisory 11B-904.2 Approach....
-
RUNNING SLOPE
[DSA-AC] The slope that is parallel to the direction of travel. (As differentiated from the definition of “Cross Slope”.)...
-
11B-405.2 Slope
Ramp runs shall have a running slope not steeper than 1:12. Exception: Reserved....
-
11B-904 Check-out aisles and sales and service counters
[See subsections ...]
-
CROSS SLOPE
[DSA-AC] The slope that is perpendicular to the direction of travel....
-
11B-231.4.1 Cubicles and counters
Where counters are provided, at least one shall comply with Section 11B-904.4.2 on both the visitor and detainee sides....
-
11B-227.1 General
Where provided, check-out aisles, sales counters, service counters, food service lines, queues, and waiting lines shall comply with Sections 11B-227 and 11B-904....
-
11B-406.5.7 Cross slope
The cross slope of curb ramps and blended transitions shall be 1:48 maximum....
-
11B-904.1 General
Check-out aisles and sales and service counters shall comply with the applicable requirements of Section 11B-904....
-
11B-227 Sales and service
[See subsections ...]
-
11B-406.4.1 Slope
Blended transitions shall have a running slope not steeper than 1:20....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-1009.3.1 Sloped entries
Sloped entries shall comply with Division 4 except as modified in Sections 11B-1009.3.1 through 11B-1009.3.3....
-
11B-1009.3 Sloped entries
Sloped entries shall comply with Section 11B-1009.3. Advisory 11B-1009.3 Sloped entries. Personal wheelchairs and mobility devices may not be appropriate for submerging in water....
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided....
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
11B-232.5.1 Cubicles and counters
Where counters are provided, at least one shall comply with Section 11B-904.4.2 on both the visitor and detainee or inmate sides....
-
11B-810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable....